Jump to content
SAU Community

Recommended Posts

I am using the greddy with great results on my 25. The head is off atm for larger cam installation. This is the 2nd time I have lifted the head since we built the engine and on both occasions the evenness of the burn across all 6 has been very impressive. It would appear that the greddy does offer very even distribution and certainly has no probs delivering enough to make good power.

The cleaner engine bay is just another plus for this style of plenum. Thumbs up all the way from me.

I also have the greddy plenum,

If you are after a Q45 throttle body contact Throtle Bodies Australia

just make sure you state that they have the same TPS as SR20 (can anyone confirm this)

He makes custom billet throttle bodies,

MAKE SURE YOU SPECIFY EVERYTHING AND THAT HE KNOW WHAT A Q45 THROTTLE BODY IS

this will eliminate the hassle that I went through.

I didn't state the type of TPS and had a little trouble finding the universal TPS that they say they use.

It cost $550 delivered from memory but that was a while ago

post-35997-1202431342_thumb.jpg

post-35997-1202431363_thumb.jpg

I also have the greddy plenum,

If you are after a Q45 throttle body contact Throtle Bodies Australia

just make sure you state that they have the same TPS as SR20 (can anyone confirm this)

He makes custom billet throttle bodies,

MAKE SURE YOU SPECIFY EVERYTHING AND THAT HE KNOW WHAT A Q45 THROTTLE BODY IS

this will eliminate the hassle that I went through.

I didn't state the type of TPS and had a little trouble finding the universal TPS that they say they use.

It cost $550 delivered from memory but that was a while ago

nice website! nice photography! Awesome workmanship - Darren is the man for all your billet needs!

http://www.ripsltd.co.nz/performance/products.html

RIPS ones are supposed to be good, I have got one on my RB30DET but have not run it yet - Hopfully get it tuned next week!

around $1200nzd

thats for the basic rb25 manifold, the rb26 ones are far more expensive...

It cost $550 delivered from memory but that was a while ago

Thats way dearer than a Q45 new form japan.... and the nissan Q45 tps works fine. And honestley the Q45 throttle body shits on anything aftermarket to drive, the staged linkage setup is a god send on some cars, alot of the aftermarket jobbies are great for track and drag but suck to live with day to day with on/off clutches and so forth.

Aftermarket throttle bodies are great IF you need it, me i'll take the Q45 on 90% of cars i do, and the a/m ones fill the rest of the requirements.

nice website! nice photography! Awesome workmanship - Darren is the man for all your billet needs!

hahaah shit website.. terible photography..... kidding :) . nice work darren it looks like one of your websites (background). i was going to contact you about some web work, can you fix your portfolio link on your site?

What's the stock one good for?

Getting really angry and annoyed when trying to change spark plugs ;)

Just realised you were talking about the throttle body and not the plenum.......carry on.

Edited by PM-R33
Wondering whether to get a bigger TB for my forward facing plenum..

Yeah ive been wondering that aswell. Autosalon did a good review on the Hypertune one on their R33, said throttle response was a lot sharper and the dyno graph showed a power gain right throughout the rev range. Hmm...

dave i still have a rips plenum here. would love to trial fit it on your motor to see y i couldnt get it on mine. engine out of the car would make it a bit easier. gasket matched it was something else maybe water line or air reg or something.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...