Jump to content
SAU Community

Recommended Posts

CAR: 89 R32 GTR.

Problem:

The bell shaped metal housing that is attached to the firewall and to the piping for the clutch fluid reservoir has torn and all fluid clutch fluid leaked out. tear is pretty severe, much like a can being opened, inside i see a coil/spring of some description wrapped around a large metalic line or bar.

Obviously the clutch doesnt really disengage anymore and the pedal feel is far from normal, having very little resistance for the first half when depressed, then having a very firm spot which when depressed further causes a "ping" sound and the pedal to skip/drop a few centimeters before becoming firm again.

Questions:

1. Has a fluid leak caused the tear or has the tear caused the fluid leak? (fluid levels were fine 2 weeks ago when last checked)

2. How hard is it to get this fixed? Costs estimate?

3. What is function of the bell housing?

Any help would be much appreicated and apologies for the noobness of my descriptions. Thanks in advance.

Edited by SandalsBoy
Link to comment
https://www.sau.com.au/forums/topic/204771-hoping-for-some-advice/
Share on other sites

x2 need a pic? not sure if you are descripbing the master cylinder, brake booster or the recess in the firewall? or something else altogether?

Here it is. Hope this angle will be what you need. Thanks guys. Appreicate you taking the time to read.

dscn1191pi2.jpg

Picture aint working for me, but it sounds like the clutch master cylinder which is an easy fix.

Two bolts fix it the to firewall, one bolt to back of clutch pedal in the pedal box (this ones fiddly), and one hydralic line to clutch slave cylinder - thats for an Rb30 anyhow. Bleeding the clutch afterwards will be the most fun part of the job.

Paid $40 for mine, will be a bit more for a skyline

Picture aint working for me, but it sounds like the clutch master cylinder which is an easy fix.

Two bolts fix it the to firewall, one bolt to back of clutch pedal in the pedal box (this ones fiddly), and one hydralic line to clutch slave cylinder - thats for an Rb30 anyhow. Bleeding the clutch afterwards will be the most fun part of the job.

Paid $40 for mine, will be a bit more for a skyline

Thanks for the reply mate. Sounds less serious than it looks. Can anyone who can see the picture verify that this is what has happened?

that's the clutch booster, not the clutch master cylinder that has broken - no idea how you've managed that (you might want to take a pic of the pedal and bracket inside the car too, it might have broken first.

its a bit of a pain to change but you should be able to pick one up second hand they are pretty reliable.

If you go to wreckers you might need to tell them its the clutch booster twice - I think its a bit unusual to have vacuum boost for the clutch, most cars only have it for the brakes. Might as well do the master cylinder at the same time they are pretty cheap.

that's the clutch booster, not the clutch master cylinder that has broken - no idea how you've managed that (you might want to take a pic of the pedal and bracket inside the car too, it might have broken first.

its a bit of a pain to change but you should be able to pick one up second hand they are pretty reliable.

If you go to wreckers you might need to tell them its the clutch booster twice - I think its a bit unusual to have vacuum boost for the clutch, most cars only have it for the brakes. Might as well do the master cylinder at the same time they are pretty cheap.

Thanks Duncan, appreicate the advice :P

Yah, its unbelievable. I hadn't even known a clutch have a booster - Haa :P

Hrmm any theories about how this could happen? Wouldnt want to replace it then have it reoccur. Prefer to find the cause of the problem rather than just fix the symptoms.

Bare in mind that all the clutch fluid has leaked out also... not sure if makes a difference.

well I was wondering what the pedal looks like, the clutch bracket itself can break which means you might have been pushing at a wierd angle = broken booster. But I've never seen this before.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...