Jump to content
SAU Community

Recommended Posts

Just recived my greenslip renewal notice for 2008 including the new MCIS levis (medicare and injury services levis)

nrma want $615.83

aami want $609.00

i usually pay $330 approx

i have a no accident history,29yo,automatic,garaged good area,60% N.C.B,etc etc

what gives?

aami said its because its an import,but i have never had this high a premium on my r32gts-turbo manual......

thats over 1K including rego and pink slip...

Link to comment
https://www.sau.com.au/forums/topic/204790-2008-greenslip-price-increase/
Share on other sites

Just recived my greenslip renewal notice for 2008 including the new MCIS levis (medicare and injury services levis)

nrma want $615.83

aami want $609.00

i usually pay $330 approx

i have a no accident history,29yo,automatic,garaged good area,60% N.C.B,etc etc

what gives?

aami said its because its an import,but i have never had this high a premium on my r32gts-turbo manual......

thats over 1K including rego and pink slip...

thats quite strange , i had registered an evo8 in november last year, greenslip thru aami for $430

ive recently moved all the insurance for work cars over to QBE. give them a go

thats quite strange , i had registered an evo8 in november last year, greenslip thru aami for $430

ive recently moved all the insurance for work cars over to QBE. give them a go

yeah that was last year

i tried qbe but there online qoute system doesnt work.

Mines coming up so I doublechecked and it was actually down on last year.

With AAMI - $321 and my R33 is $328.

Somethings amiss with yours.

Insurance however with Shannons went up $200 with full NCB to $1800.

Strange, Just registered mine in december for $600 and Im Manual, Turbo, 22, male and live in a very bad area.. Go figure..

My insurance is 2890.. :P

I'm surprised at $2300 for the V35 coupe. And that was in Parramatta bro!!

Mines coming up so I doublechecked and it was actually down on last year.

With AAMI - $321 and my R33 is $328.

Somethings amiss with yours.

Insurance however with Shannons went up $200 with full NCB to $1800.

hey skizo,

are you sure you can definatley get that price,or was it an online quote?

i did several online and got 3 quotes for approx 300 and 4 quotes for 600+

as soon as i ring them up to confirm the $300 quotes i get 'im sorry but as its an import it will be 600''

with all the insurers online qoute systems its impossible to select our model because its an import........

I had to pay it yesterday and I rang them up to confirm and it was $321. But I do have a sedan. I called them up when I got the car initially as that model wasn't in the online system yet.

I just tried to get an online quote from AAMI and something strange - I couldn't get a quote for any skylines!

I called up again today(no wait time, love it), just to doublecheck and the lady was very nice and explained to me everything. I am covered no worries eveything matches up. I asked for a quote on a 350GT Auto coupe. With all my details it was $328. I explained to her that you guys were getting quotes double that figure and she said the only variable that would affect the cost by that much is if the car was registered for work use.

She also said AAMI has some sort of relationship with Shannons as well as me having 2 cars with them, so I get a little bit of a discount there as well. But not that much. She also said, whether it's an import or not doesn't matter as much when it comes to CTP because the government sets rough price guidelines(it is a government initiative after all) which means they can't vary the prices as much as Full Comp.

:laugh:

  • 1 year later...

I just got my greenslip (NSW) renewal from QBE and it's $623. I'm 28 also live in a good area and have max NCB. Car's a 98 Skyline (turbo/manual) and I just got a quote from Allianz over the phone for $639, wtf ?

I mentioned to the lady that you got quoted $331 and she said she can't tell why that is without looking at your quote to see what the difference is. I even mentioned that your car is an older model .. Any chance you can provide me with your Allianz quote # ? If not I understand.

Since when is CTP so friggin expensive ??? It's my first time renewing CTP on the skyline and all previous cars were never more than $400. $630 for greenslip is a bloody joke!!!

Just putting my 2 cents in

26 yr, v35 2003, "just car insurance" $1464 (sister company of Shanons)

and i live in the getto of Geraldton WA

Edited by v35_Pau

we're talking about greenslip insurance (CTP/compulsory third party) which is needed to renew car rego, not the normal comprehensive insurance which comes on TOP. Maybe there's no CTP in WA or it might be included in your normal insurance like in the ACT.

Edited by Delta Force

Move to W.A. fellas... The government here was not stupid enough to privatize motor vehicle insurance, so you pay one price for greenslip + rego from the DPI (RTA equivalent).

Just got my renewal from the Gov, Will cost me $433.50 to Rego & insure my turbo skyline for 12 months. No 'pinkslip' inspection required unless rego lapses for more than three months.

Just before i left NSW i regoed my skyline then to the tune of about $1400 (610~ for greeny, 500~ for RTA & another ~300 for dodgy brothers blue slip)

Told many a horror story to Western Australians about the cost of Rego in NSW :):P

Just bought an 04 V35 350GT from a QLD'er, putting it into NSW $1300+ later...it's officially a NSW registered car. Greenslip itself was $356, not too shabby. Previous car, HSV R8 Clubsport, only $30 cheaper in terms of greenslip ...price you pay to have such a car :P

Edited by V35 350GT
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...