Jump to content
SAU Community

Recommended Posts

Any one out there with an R32 or S13? You sick of the rear axle tramp on hard launches? Want better take off? OR How bout making the rear more predictable for drifting?

I HAVE YOUR ANSWER => PINEAPPLES

These are urethane rings that solid mount, and modify the angle of, your rear sub-frame. There are two methods of installation, GRIP and DRIFT. This modification to your car is completely reversable, can be changed between GRIP and DRIFT in around an hour or so, and greatly reduces axle tramping.

These 'PINEAPPLES' have been marketed by Japanese Motorsports in Adelaide for $150 for a while now. I have found a local source, and can supply them for $110 WITH ENGLISH INSTRUCTIONS.

I can also fit these to your car if your in the melbourne area.

PM me, E-Mail me at [email protected], or call me on 0411 878 961 if you are interested.

Link to comment
https://www.sau.com.au/forums/topic/2048-get-rid-of-axle-tramp-r32-or-s13/
Share on other sites

Nope, axle tramp is when you get wheel spin and your wheels and subframe 'bounce' a bit and cause major vibrations through your car. Of course bouncing wheels are not good for take off. If you need further explaination call me on 0411 878 961.

Doc.

Doc,

Can you explain where and how they mount. I've seen the pineapples on JMS that your talking about, but I could never workout where and how they work.

Do they work like a shock absorber for your sub frame or something?

And how do you change them between grip and drift? Is it just locating them in a different part of the sub frame?

And the big question (and last - sorry :P ) are they legal???

Thanks

J

Ok, There's four main bolts that hold your subframe on. All of these bolts have rubber bushes in them that allow the entire rear sub-frame to move around. Pinapples reduce the movement of these bushes.

You can mount the pinapples either above or below the subframe to take up the movement. These particular ones are designed to mount diagonally opposite, IE Front Top & Rear Bottom OR Front Bottom & Rear Top.... When you take up the slack in this manner it will slightly rotate the entire rear subframe, and hence your lower control arms. I believe it is this change in angle of the lower control arms that gives you your different handling characteristics.

Switching them over is a simple matter of removing and refitting by the other method.

LEGALITY => I have no idea, and refuse to 'guess'. You would need to speak to an engieeer for approval. I would simply paint them black when fitted and plead ignorance if it becomes a problem.

J, Hope this helped your curiosity. The JMS instructions are in Japanese and difficult to interpret. Call me if you want to discuss? 0411 878 961

Doc.

J,

What sort of car is it? Changing tyres wont help, I've tried it. Some of it is due to shockies but most is due to your subframe moving aroung.... Keep me posted if you want me to order a set.

Doc.

Doc,

At the moment I'm running Sava Raptex's - I must say that they are the worst tyres I have ever run on ANY car !!! But when I got them I was strapped for cash and needed to go over the pits - I really can't complain as they cost me $93 each (225/50/16's) and I've got 12 months from them.

I'll be getting the Dunlop FM901's in the same size so I'm hoping for a massive increase in traction :P but as you said, I'm not sure if they will fix the axle tramp. The suspension is pretty tight in the back (which doesn't help).

I'll let you know how I go after the new tyres go on.

Thanks

Jayson

The car is a R33 GTS-t.

Dig this - just did the phone around to get some FM901's (225/50/16). Prices range from $200 each to $271 each!!!!

Apparently Dunlop have put their price up as of tomorrow, so for any store that needs to order them in they have to quote the higher (after increase) price !!!!

I've found a place that has them in stock so I'm hoping to get them before the weekend........

Sorry - that was a bit off topic - I was just shocked !!

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...