Jump to content
SAU Community

Recommended Posts

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :cheers: WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

Edited by HaZ3inSKY
Link to comment
https://www.sau.com.au/forums/topic/205297-battery-problems-please-help/
Share on other sites

1) speak better english.

2) if you have let a lead-acid battery stay in a discharged (flat) state for more than a few hours it has sulfated and will never hold a charge again.

Replace your battery. Three days of being flat means the battery is stuffed.

/thread

please get an omnimeter and measure the voltage directly from your battery terminals and post that first.

it does sound like a sulphated battery, but it could also be a corroded or degraded wire where they connect to the connectors onto the battery, since the factory don't solder the connections, they just clamp them.

get the battery shop to run some tests on your alternator and battery function.

If the battery is bad and you measure the voltage while the alternator is running and the voltage is up aqround 14V instead of 13.5V it indicates your battery needs replacing.

Battery conditioner will usually fix a reasonably new battery

If your car is not going flat after starting it a few times or your lights etc. dont dim as you increase the load on the circuit then its not your alternator i.e. regulator, brushes, windings etc. 14v is within the normal op range I thought?

There may be a current drain coming from somewhere else which will require you to look around the car with a multimeter to find the short. Not sure why you would measure voltage with an ohmeter (only measures resistance) unless you mean a multimeter which does the lot.

That click is the horn relay. If your horn isnt working it may be associated with that. Check to make sure the horn is actually plugged in and that the correct size fuse is being used. If its already plugged in, un plug it (tape the wires so dont touch car) and see if it happens again...

Edited by Jmaac

Thanks I was looking for the word "multimeter" could only think of "omnimeter" meaning meters everything: I was not reffering to "ohmmeter". Guess I could have used voltmeter.

HaZ3inSKY if you want help please get that reading direct from the battery terminals with the car switched off.

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :) WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

check for poor earth or an earth leak. Had one on my boat and used my 2week old battery as a sinker cause it would not hold charge after that

You pretty much got your answer @ post 2

Unless it was a deep-cycle battery it's probably cactus, could try getting a little more life out of it with some battery conditioner to de-sulphate the lead plates, but generally it will never be the same as a new one.

  • 3 weeks later...

I had the same problem a while back when my sister borrowed my car for a day to work. When she came back, she didn't switch off the fog light. After 2-days i wanted to drive the car and when i put the key into the ignition barrel and turned, nothing happened. Not even a clicking sound. Saw the fog light switch still on so i decided to jumper the car with my mum's corolla. Took a while too. Crank it like 4times before it will start. Took it for a spin on the highway for an hour and the battery was fully charged. Reads 14v on my Blitz FATT.

Another note, my friend's car will never start after he parks it overnight. Reason is that the charging light comes on eveytime he switched the engine off hence battery power is draining when the car has no power. It was a faulty alternator in the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...