Jump to content
SAU Community

Recommended Posts

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :cheers: WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

Edited by HaZ3inSKY
Link to comment
https://www.sau.com.au/forums/topic/205297-battery-problems-please-help/
Share on other sites

1) speak better english.

2) if you have let a lead-acid battery stay in a discharged (flat) state for more than a few hours it has sulfated and will never hold a charge again.

Replace your battery. Three days of being flat means the battery is stuffed.

/thread

please get an omnimeter and measure the voltage directly from your battery terminals and post that first.

it does sound like a sulphated battery, but it could also be a corroded or degraded wire where they connect to the connectors onto the battery, since the factory don't solder the connections, they just clamp them.

get the battery shop to run some tests on your alternator and battery function.

If the battery is bad and you measure the voltage while the alternator is running and the voltage is up aqround 14V instead of 13.5V it indicates your battery needs replacing.

Battery conditioner will usually fix a reasonably new battery

If your car is not going flat after starting it a few times or your lights etc. dont dim as you increase the load on the circuit then its not your alternator i.e. regulator, brushes, windings etc. 14v is within the normal op range I thought?

There may be a current drain coming from somewhere else which will require you to look around the car with a multimeter to find the short. Not sure why you would measure voltage with an ohmeter (only measures resistance) unless you mean a multimeter which does the lot.

That click is the horn relay. If your horn isnt working it may be associated with that. Check to make sure the horn is actually plugged in and that the correct size fuse is being used. If its already plugged in, un plug it (tape the wires so dont touch car) and see if it happens again...

Edited by Jmaac

Thanks I was looking for the word "multimeter" could only think of "omnimeter" meaning meters everything: I was not reffering to "ohmmeter". Guess I could have used voltmeter.

HaZ3inSKY if you want help please get that reading direct from the battery terminals with the car switched off.

I brought my Skyline out as usual. I didn't drive it for three days after. I then tried starting it but nothing ...click click click(may have had lights on). So I jump started the bitch and took it for a spin around the block for about 20- 30 mins . I turn the engine off and then tried starting up again, n it did no probs.

Next morning I try starting it up and NOTHING :) WHY OH WHY!!!? The thing is, I changed a new battery and re-con the alternator a couple of months back. Any suggestions?

check for poor earth or an earth leak. Had one on my boat and used my 2week old battery as a sinker cause it would not hold charge after that

You pretty much got your answer @ post 2

Unless it was a deep-cycle battery it's probably cactus, could try getting a little more life out of it with some battery conditioner to de-sulphate the lead plates, but generally it will never be the same as a new one.

  • 3 weeks later...

I had the same problem a while back when my sister borrowed my car for a day to work. When she came back, she didn't switch off the fog light. After 2-days i wanted to drive the car and when i put the key into the ignition barrel and turned, nothing happened. Not even a clicking sound. Saw the fog light switch still on so i decided to jumper the car with my mum's corolla. Took a while too. Crank it like 4times before it will start. Took it for a spin on the highway for an hour and the battery was fully charged. Reads 14v on my Blitz FATT.

Another note, my friend's car will never start after he parks it overnight. Reason is that the charging light comes on eveytime he switched the engine off hence battery power is draining when the car has no power. It was a faulty alternator in the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
    • ^ This. The mode door actuator is a common failure, as is the actuator and/or the actual valve for the coolant flow control valve. I also don't know how available the mode door actuator is these days. I've been meaning to look into it and get one from wherever is possible, to keep in the shed for the rainy day when mine eventually fails. Anyway, the advice to you is to search the usual NOS part supply places, or even just go to Nissan and see what they list.
    • Have you got a pic of the actuator? My guess is that unit has failed internally and was flopping around, so the previous engineer who owned it forced it to be fully open to cold air (blocking the heater core path). As far as you can tell, is anything else wrong in the system? Likely you just need a new actuator (not sure how available they are) and then "installation is the reverse of disassembly"
    • I'm happy with the Lsailt unit that I put in, it puts full Android on the top screen so you can run whatever Nav and other Apps you want, while still existing inside the factory functionality like automatic reverse cams, audio input switching, retains factory bluetooth etc. Not cheap and the install was moderate (not simple, not hard) Yours is a V36 not V37 though right?
    • Yeap, all the NC's that I originally looked at that had a hard top were PRHT, which makes the roof line look horrible, hence why I said nope to them My only caveat for another MX5 was it needed to have a hard top, and initially I didn't think you could get a detachable hard top for the NC,  like my NB had Again, a big thanks to Matty for helping me source the detachable hard top for my little girl, they are as rare as hens teeth in Australia, and the few people who have them, keep them Also to Greg, for initially pointing me in the NC direction NC PRHT 🤢🤮 Not mine (I really should take more photos of my car), but a NC with the detachable hard top 😁 To me, the difference in how the detachable hard top roof line looks, and how it actually follows the bodies lines, like they do on NA's and NB's, is chalk and cheese compared to the bulbous looking PRHT  
×
×
  • Create New...