Jump to content
SAU Community

Rb20 Wrecking, Td06, Rb26 Injectors And Resistor Pack, Plenty Of Bits.

Jays_5000
 Share

Recommended Posts

Jays_5000 Collaborator

Jays_5000

Posted
Posted (edited)

I managed to stuff my RB20 at power cruise, pretty sure a bearing has gone so the lot is for sale.

The following items were bought but not yet fitted to the motor.

Trust TD06-20G - Good condition $1200

14022008105mp3.jpg

14022008107nc5.jpg

14022008106eq4.jpg

Set of 6 GTR injectors, $300 o.n.o. SOLD

GTR resistor pack, $150.. Only turned up in the mail this afternoon, that's what I paid for it so would like to make it back. SOLD

I have a near complete RB20DET with what I'm guessing has spun a bearing. The motor is still in the car and still runs (as it only went yesterday) and is fitted with the following aftermarket parts.

VG30DET turbo (fitted with r32 wastegate actuator, spring is at 12psi) SOLD

Split pipe dump modified into screamer pipe

Also selling RB20 Gearbox.

Price on the above will be worked out upon what the buyer wants included.

Please don't hesitate to contact me with any questions.

Thanks, Jayson

[edit 18/2] Also have 6 Standard R32 GTS-T rims painted black, $50 a wheel.

RB20DET gearbox $400 or best offer.

TD06-20G still here aswell.

R32 GTS-t tail shaft make an offer.

Have intercooler pipes here to suit generic 300x600 front mount.

Stock RB20DET ecu. $150 OR BEST OFFER

RB20 Alternator, reco'd around two months ago $100

Engine at the moment still has full intake side attatched minus alternator, exhaust side missing turbo and lines, Still have stock manifold. Would prefer to not have to pull the engine apart, am willing to take exhaust manifold off but prefer to keep intake side complete. Make an offer will let the lot go cheap, pull apart whiz a new rod and bearing in and you'd have your self a good RB20 for f**k all cash.

My number is 0409869892 if you want to reach me urgently.

Have plenty more bits laying around to suit RB20 so whiz me a PM if you're after anything in specific.

Jayson

Edited by Jays_5000
Jays_5000 Collaborator

Jays_5000

Posted
  • Author
Posted

Gear box is feeling a little tired, apparently its got a short shift kit and all with it. When its warm it will some times knock when your in neutural and foots off the clutch so don't know if it's the input shaft or just a throw out bearing... All gears work and still shifts quite well, just gets a bit noisy. I don't need it anymore so if your keen PM me an offer.

I'll check the turbo for you mate.

Jays_5000 Collaborator

Jays_5000

Posted
  • Author
Posted

Also have 6 Standard R32 GTS-T rims painted black, $50 a wheel.

RB20DET gearbox $400 or best offer.

TD06-20G still here aswell.

R32 GTS-t tail shaft make an offer.

Have intercooler pipes here to suit generic 300x600 front mount.

Stock RB20DET ecu. $150 OR BEST OFFER

Engine at the moment still has full intake side attatched minus alternator, exhaust side missing turbo and lines, Still have stock manifold. Would prefer to not have to pull the engine apart, am willing to take exhaust manifold off but prefer to keep intake side complete. Make an offer will let the lot go cheap, pull apart whiz a new rod and bearing in and you'd have your self a good RB20 for f**k all cash.

My number is 0409869892 if you want to reach me urgently.

Jayson

Have plenty more bits laying around to suit RB20 so whiz me a PM if you're after anything in specific.

Jays_5000 Collaborator

Jays_5000

Posted
  • Author
Posted

No worries.

Type: TD06-20G

Serial no: 970929005

Part no: blank

MFD n: 49179-01180

Sorry mate, not the L2 you're after but it is the newer version of the plain 20G (blue tag), if your interested send me a PM and we'll be able to discuss it further :banana:

Jayson

Roy Grand Master

Roy

Posted
Posted

Thanks for the prompt response Jayson. It seems its the same turbo as i already have. For any RB20 owners out there, you should serisouly consider it as its about as big as you can go on a std Rb20 and still have reasonaly responsive engine and be able to make 240-260rwkws, all on a std motor. Great turbo for a 2L, they do have a big turbo feel to them when you drive the car :cheers:

Jays_5000 Collaborator

Jays_5000

Posted
  • Author
Posted

Cheers mate, they are definatly a good turbo on almost any engine.. 20G's love SR20's even more than RB20's. I know of 1 or 2 180's fitted with them down this way that would be pushing close to 300kw with the right supporting mods. IDEAL!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...