Jump to content
SAU Community

Recommended Posts

I managed to stuff my RB20 at power cruise, pretty sure a bearing has gone so the lot is for sale.

The following items were bought but not yet fitted to the motor.

Trust TD06-20G - Good condition $1200

14022008105mp3.jpg

14022008107nc5.jpg

14022008106eq4.jpg

Set of 6 GTR injectors, $300 o.n.o. SOLD

GTR resistor pack, $150.. Only turned up in the mail this afternoon, that's what I paid for it so would like to make it back. SOLD

I have a near complete RB20DET with what I'm guessing has spun a bearing. The motor is still in the car and still runs (as it only went yesterday) and is fitted with the following aftermarket parts.

VG30DET turbo (fitted with r32 wastegate actuator, spring is at 12psi) SOLD

Split pipe dump modified into screamer pipe

Also selling RB20 Gearbox.

Price on the above will be worked out upon what the buyer wants included.

Please don't hesitate to contact me with any questions.

Thanks, Jayson

[edit 18/2] Also have 6 Standard R32 GTS-T rims painted black, $50 a wheel.

RB20DET gearbox $400 or best offer.

TD06-20G still here aswell.

R32 GTS-t tail shaft make an offer.

Have intercooler pipes here to suit generic 300x600 front mount.

Stock RB20DET ecu. $150 OR BEST OFFER

RB20 Alternator, reco'd around two months ago $100

Engine at the moment still has full intake side attatched minus alternator, exhaust side missing turbo and lines, Still have stock manifold. Would prefer to not have to pull the engine apart, am willing to take exhaust manifold off but prefer to keep intake side complete. Make an offer will let the lot go cheap, pull apart whiz a new rod and bearing in and you'd have your self a good RB20 for f**k all cash.

My number is 0409869892 if you want to reach me urgently.

Have plenty more bits laying around to suit RB20 so whiz me a PM if you're after anything in specific.

Jayson

Edited by Jays_5000

Gear box is feeling a little tired, apparently its got a short shift kit and all with it. When its warm it will some times knock when your in neutural and foots off the clutch so don't know if it's the input shaft or just a throw out bearing... All gears work and still shifts quite well, just gets a bit noisy. I don't need it anymore so if your keen PM me an offer.

I'll check the turbo for you mate.

Also have 6 Standard R32 GTS-T rims painted black, $50 a wheel.

RB20DET gearbox $400 or best offer.

TD06-20G still here aswell.

R32 GTS-t tail shaft make an offer.

Have intercooler pipes here to suit generic 300x600 front mount.

Stock RB20DET ecu. $150 OR BEST OFFER

Engine at the moment still has full intake side attatched minus alternator, exhaust side missing turbo and lines, Still have stock manifold. Would prefer to not have to pull the engine apart, am willing to take exhaust manifold off but prefer to keep intake side complete. Make an offer will let the lot go cheap, pull apart whiz a new rod and bearing in and you'd have your self a good RB20 for f**k all cash.

My number is 0409869892 if you want to reach me urgently.

Jayson

Have plenty more bits laying around to suit RB20 so whiz me a PM if you're after anything in specific.

No worries.

Type: TD06-20G

Serial no: 970929005

Part no: blank

MFD n: 49179-01180

Sorry mate, not the L2 you're after but it is the newer version of the plain 20G (blue tag), if your interested send me a PM and we'll be able to discuss it further :banana:

Jayson

Thanks for the prompt response Jayson. It seems its the same turbo as i already have. For any RB20 owners out there, you should serisouly consider it as its about as big as you can go on a std Rb20 and still have reasonaly responsive engine and be able to make 240-260rwkws, all on a std motor. Great turbo for a 2L, they do have a big turbo feel to them when you drive the car :cheers:

Cheers mate, they are definatly a good turbo on almost any engine.. 20G's love SR20's even more than RB20's. I know of 1 or 2 180's fitted with them down this way that would be pushing close to 300kw with the right supporting mods. IDEAL!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...