Jump to content
SAU Community

Recommended Posts

hello peoples, i have a r32 turbo im my rb25 r33 gtst. i have had problems with my air flow meter so i used one off my mates he has a r32 gtst and my car flew. so i went to get a new air flow meter today and every r33 one a tryed was no good so i got a r32 gtst air flow meter now the car runs fine is my problem that i have a r32 turbo on a rb25 motor and thats why it dont like the r33 air flow meter????

thanks

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

this will depend on what motor you have

if your car came with stock pink label AFM its series 2 and you can only use series 2 (pink afm's)

if its blue or green then its a series 1 engine and you can use r32 AFM fine (as its the same unit)

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3638355
Share on other sites

no im not using series 2 as ino there pink i have just been trying green label ones and the only one that works is the r32 gtst afm that has 4 gold pins not 5

and no the power is the same if not better coz this turbo spools up quicker lol so ur comment sucks

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3638713
Share on other sites

this will depend on what motor you have

if your car came with stock pink label AFM its series 2 and you can only use series 2 (pink afm's)

if its blue or green then its a series 1 engine and you can use r32 AFM fine (as its the same unit)

do you no if the blue label air flow meters have 5 gold pins for the plug or 4 like a r32 one's do.

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3638715
Share on other sites

no im not using series 2 as ino there pink i have just been trying green label ones and the only one that works is the r32 gtst afm that has 4 gold pins not 5

and no the power is the same if not better coz this turbo spools up quicker lol so ur comment sucks

My comment doesn't suck, I would imagine it has very SIMILAR spooling characteristics as my engine. Yes it may spool quicker but it will choke top end.

Also how do you figure that a turbo that flows LESS air will make MORE power??

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3639494
Share on other sites

no im not using series 2 as ino there pink i have just been trying green label ones and the only one that works is the r32 gtst afm that has 4 gold pins not 5

and no the power is the same if not better coz this turbo spools up quicker lol so ur comment sucks

Big talk for someone asking for help...

And bubba is right...power will be lower as the r32 turbo is smaller and flows less...and it will choke alot quicker than a r33 turbo...i think what you are trying to say is boost response is better...

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3639552
Share on other sites

this will depend on what motor you have

if your car came with stock pink label AFM its series 2 and you can only use series 2 (pink afm's)

if its blue or green then its a series 1 engine

hmm... i have a S1 r33 and i have a pink afm???

works great. its a 95 model (so 1.5 or whatever..) but i know the 95(1.5) model doesnt have a s2 engine.

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3640728
Share on other sites

hmm... i have a S1 r33 and i have a pink afm???

works great. its a 95 model (so 1.5 or whatever..) but i know the 95(1.5) model doesnt have a s2 engine.

someone has changed your afm plug to a series 2 one...for some reason

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3640817
Share on other sites

i never said it was better, it makes the same power and everyone has told me r32 turbo is the same as r33 i dunno if thats right or not, but this car dont choke i dont have dino sheet but what ever a stock r33 would run with a front mount on 10psi im telling you it flys past a stock r33 as i beat one the other day he did the whole turning right thing after it lol

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3641657
Share on other sites

yeah a 32 turbo and 33 are very different.

its hard to measure and come to a conclusion that it would be quicker than a stock 33 simply because you 'raced' one on the street.

- he might not have been giving it as much

- missed a gear

- didnt know he was racing you

- or been a real shit driver

many factors..

just out of curiosity, how come you have a 32 turbo on a 33 anyway?

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3641925
Share on other sites

and no the power is the same if not better

-same engine

-one has a larger turbo than the other

and you think it would be the same if not better, with the smaller turbo?

unless you have other hidden modifications that you are unaware of or its high flowed or something. i dont see how you could conclude this.

chuck it on a dyno and see what it makes i reckon :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3641926
Share on other sites

The turbo is going to make roughly the same power regardless of what engine it is on, larger capacity will just make the power earlier.

So, like I said, 160rwkw @ 4600rpm. Put a 33 turbo back on there and I bet you'll make ~180rwkw @ ~6000rpm.

Link to comment
https://www.sau.com.au/forums/topic/205530-r33-gtst-afm/#findComment-3642196
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...