Jump to content
SAU Community

My Gtr Has A Petrol Smell Always. Wheres It From?

Owgasm

By Owgasm,
in General Maintenance

 Share

Recommended Posts

Owgasm Grand Master

Owgasm

Posted
Posted

Hey all,

for some reason when i'm driving, windows up and everything. with the aircon on.. i can just smell petrol.... sometimes it drives me rather crazy.

Its not just pure petrol fumes.

My rear window wasn't sealed properly, so i thought it was that, so i sealed that and i still get the smell.

It really bugs me. Everyone complains?

Anyone know where i should be looking to be the source of it?

Thanks in advance.

GTR-32U Mentor

GTR-32U

Posted
Posted

start from one end of the car and work toward the other. Start at the tank and check every fuel line and right up to the filter and then the injectors.you may need to run the car to get it to smell...but it sounds like a fuel hose may be hardened and brittle thus not sealing properly

Mr. Keets Grand Master

Mr. Keets

Posted
Posted

Check to see if the rubber strip on the rear edge of you hood is there, some guys remove it or put spacers under the hood hinges... it allows heat to be sucked from the engine bay . The lower pressure that sucks out the heat is also responsible for feeding the plenum just behind the back edge of the hood which in turn feeds the heater box and A/C. Try leaving your A/C on recirculate for a while.

Owgasm Grand Master

Owgasm

Posted
  • Author
Posted
does the exhaust tip finish well past the bottom edge of the rear bar?

I don't think it does.

Check to see if the rubber strip on the rear edge of you hood is there, some guys remove it or put spacers under the hood hinges... it allows heat to be sucked from the engine bay . The lower pressure that sucks out the heat is also responsible for feeding the plenum just behind the back edge of the hood which in turn feeds the heater box and A/C. Try leaving your A/C on recirculate for a while.

I will take a look tomorrow morning, not quite sure what rubber strip but will take a look. By hood, i take it you mean bonnet.

Yeah, i think i have to check around the a/c, but i haven't tried windows up with no a/c.

So you could be right, anything else that could be leaking around the a/c.. or that feeds into the vents?

4drlvr Proficient

4drlvr

Posted
Posted

i had this problem and found that it was to do with the little plastic bit that sits on top of the fuel tank. Its the one which has all 3 fuel hoses coming out off. I had 3 massive cracks in it , changed that and then no mre petrol smell

donkey Community Regular

donkey

Posted
Posted (edited)

hey, r33 gtr done 160k, plus my wrx also done 160k, both had the exact same problem, windows up, air con on, raw petrol smell, check the fuel line around the fuel filter, open bonnet while at idle, give the car a few revs (when cold) should be able to see fuel mist.........

Edited by donkey
giant Mentor

giant

Posted
Posted

ijust pulled an r34 apart, and theres quite a few places you could get the petrol fumes, check it's more from the front or back of the car like in the engine bay ( injectors, fuel lines)

if you can smell it fairly strongly in the boot , i would then suggest it's coming from the fuel tank, one area it would leak fairly easily is the fuel lines out the top or connectors as suggested above, but there is also a big seal on the tank were all your fuel lines go in, if this is not positioned correctly fumes would be definately leaking into the cabin, this normally upset if somebody has fitted a hi flow intank fuel pump or repaired the fuel gauge sender etc.

cheers russ

blur Proficient

blur

Posted
Posted
also check your injectors. i just replaced two of mine due to small cracks in the body of the injector which caused a very slow leak and a very strong fuel smell.

:)

Look for fuel stains around your inlet manifold.. Many 32s are getting leaking injectors.

  • 1 month later...
  • 2 weeks later...
Jmaac Proficient

Jmaac

Posted
Posted

Look in the engine bay at your evap cannister and see if all the lines are plugged into it. Also check fuel return hose config. at petrol tank end.

I believe the AC air intake snorkel is on the passenger side of the firewall, have a look around that also

On one of my old cars, my ac intake was literally sucking the fumes straight out of the petrol tank via loose hose to charcoal cannister - mmmmm nice

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Crank Motorsports Front Axles

      By MBS206 · Posted

      Depending on the purpose of the car, and how much more fabbing you want to do, and what clearances you have, you could look to raise the motor, which will raise the front diff up. Likely would mean altering the chassis rails etc etc, hence the more fab work you'd need to do. However, this can create issues, not just in clearance with everything fitting under the bonnet, but you've also raised a LOT of weight up in the car, and this will DEFINITELY alter handling characteristics (But, so will how much weight you've already added to the front end). You'll also have to deal with the fact the gearbox to rear diff is now out of alignment too for the tail shaft, and alter the angle of the diff, or deal with a bit of potential vibration. Raising the motor an inch up, is effectively the same as making the whole car sit higher by not lowering it as far. So one inch higher motor, theoretically means you can drop the car an extra inch lower, and maintain the same angles in the CVs. Again, depends on the purpose of the car. If it's a just cruiser on the street car, maybe won't be an issue. If it's meant to be a time attack car, I can see you not wanting to raise the motor. This is just for you to ponder as an idea.
    • MBS206
      NC MX5

      By MBS206 · Posted

      Have you not seen geospy.ai? It can now give GPS co ords to within a metre from a photo, even if it's a random photo you take inside. Supposedly at the moment only the government/law enforcement has access to that... Supposedly...
    • Komdotkom
      Crank Motorsports Front Axles

      By Komdotkom · Posted

      I've got the rear ones, they're certainly beefy. I need to take them to my driveshaft guru to check over, he's very fussy about the quality of components so I'll let you know if they are made of cheese by a blind man.   Are you in Australia? A mate just had a set of EN26 shafts made for his K20 Lotus by our fabricator which were quite cheap (compared to Driveshaft Shop) so if you can procure the CV's and draw what you need he'd make them for ~$800 for the pair.
    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. · Posted

      Had I known the diff between R32 and R33 suspension I would have R33 suspension. That ship has sailed so I'm doing my best to replicate a drop spindle without spending $4k on a Billet one.
    • Josh K.
      Crank Motorsports Front Axles

      By Josh K. · Posted

      OEM suspension starts to bind as soon as the car gets away from stock height. I locked in the caster and camber before cutting off the kingpin. I then let the upright down in a natural (unbound) state before re-attaching it. Now it moves freely in bump and droop relative to the new ride height. My plan is to add GKTech arms before the car is finished so I can dial camber and caster further. It will be fine. This isn't rocket science. Caster looks good, camber is good, upper arm doesn't cause crazy gain and it is now closer to the stock angle and bump steer checks out. Send it.
×
×
  • Create New...