Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Turn the boost up.15psi is nothing for that turbo.But i wouldnt be doing it till you get some Ks up on the motor.

At 15psi this should make at least 300rwkw, a T78 can make 300rwkw at 15psi. Boost is definately not the problem.

In saying that, maybe is a high pressure boost leak? Can you check the plumbing? Use a compressor, and pressurise the system. Go right up to 30psi and see if you can hear anything. You'll need to fabricate some sort of inlet that you can hook the compressor up to.

Compression test.... leak down test??.... no fkn idea what it means but my cuz said it might help since you did some head work.

8:1-8.5:1 compression: 150-170 psi per cylinder

8.5:1~9.5:1 compression: 170-210 psi per cylinder

9.5:1~11:1 compression: 210-275 psi per cylinder

also make sure there isnt more than +-20 psi difference between each cylinder

also he suggested pressure testing the intercooler system for leaks....

rofl, who told you this? A Brand new RB25 makes 172psi and its comp ratio is 9:1. Its definately not accurate. What if the engine is worn?

Also, there shouldn't be any more than 5psi variance between the cylinders. 20psi? haha. If my engine had even 15psi variance, I'll pull it down..

seen a 3" exhaust make 893rwhp, so that wont be an issue

You're right, a 3" ex should flow the numbers no probs BUT if the cat substrate has collapsed, coked up etc (same for the muffler/s) there's a good chance it won't. Spend the time, drop the ex in front of the cat & at least then you'll know one way or the other for sure. Assumptions can very easily lead to f**k-ups & waste a whole lotta time

You're right, a 3" ex should flow the numbers no probs BUT if the cat substrate has collapsed, coked up etc (same for the muffler/s) there's a good chance it won't. Spend the time, drop the ex in front of the cat & at least then you'll know one way or the other for sure. Assumptions can very easily lead to f**k-ups & waste a whole lotta time

yeah soory, should said i was sorta referring in general to the flow of the exhaust, not allowing for blockages

whilst im getting specs on cams we thought we'd throw in sum standard rb25det ones

to see i that would make a difference..

tried to start it tonite and engine had nothing, sounded like no compression..

motor would spin but not normal sounding at all ?????

mayb cams not opening valves ??

will try get pics up...

hey carl, how u been mate? been alrite jus busy with work and over this car...

cant remember exactly what rpm will get the dyno print out, but it jus seems to go almost straight up to 245rwkw then flatten across, prob around 4500rpm not to sure tho..

also trying to figure out the problem on th lower boost, but might try 20psi and see what happens

Usually it shouldn't be an issue going from a large lift cam to a small lift cam but did you bleed down the lifters before you put the cams in?

if it has solid lifters and fitting the standard cams which may have a larger base circle might be causing the valves to stay open slightly making the cylinders lose compression.. as cube said, check the clearence.

If the head has been converted to solids, and now has hydraulic cams, the the opening ramps designed to close the lifter will be opening the valve and therefore the duration of the valve lift will be huge, causing it to bleed off compression.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...