Jump to content
SAU Community

Easter Saturday 22nd March

frogman

By frogman,
in Events Archive

 Share

Recommended Posts

frogman Community Regular

frogman

Posted
Posted (edited)

Hi all!

Just thought I would let everyone know that the car club I am involved in (Nepean Valley Car Club) is running 3 events on Easter Saturday.

There will be a Lap Dash on the North Circuit, you will get 1 full flying lap with a warm up & cool down into-out of the pits, we want everyone to get at least 6 runs, but will just keep sending you out till you cant take it any more(or 4.30pm, which ever comes first!)

There will also be a proper CAMS (timed) Motorkhana on the Skid Pan, minimum 6 events, 2 runs at each test.

AND.... to top it off we will be running a Khanacross on the Figure 8 dirt track too! It's relativley smooth & we will be running road tyres only (on the driven wheels, so no rally tread type tyres)

Prices are:

LAP DASH: $99

MOTORKHANA:$45

DIRT CIRCUIT:$50

These events will be run with CAMS permits, by a CAMS affiliated club (NVCC)

The normal CAMS requirements will apply for helmets, clothing, fire extinguishers, blue battery triangle etc.

PLEASE go to the link

http://nationalbugin.org.au/bug-in_nepean_...08_calendar.pdf

and fill in the registration form asap if you would like to enter & put a note on it that you are from SAU too.

If you have any quastions, feel free to pm me or just reply on here.

Edited by frogman
Link to comment
https://www.sau.com.au/forums/topic/207292-easter-saturday-22nd-march/
Share on other sites
frogman Community Regular

frogman

Posted
  • Author
Posted (edited)

For the Lap Dash, 6 runs consisting of a 3/4 of a lap warm up, 1 full flying lap & a 1/2 a lap cool down back into the pit lane.

Once everyone has done their 6, we will just keep on sending you out till you cant take it any more, or until 4.30pm, which ever comes first.

For the Skid Pan Motorkhana(dry, & no reversing tests), Minimum 6 tests

For the Dirt Circuit, 6 runs + till 4.30pm

Some entries will be accepted on the day, but, to confirm your spot & to keep(time consuming) paperwork to a minimum on the day we really would appreciate it if you can send in the registration form & payment at least a week before the event.

We can now do FREE 1 day membership to the organising CAMS club (Nepean Valley Car Club)

CAMS licences will be available to buy on the day if you don't already have one.

L2S licences $95

L2NS for the pan & dirt are $50.

Scruitineereing (is also free), & can be done by ANY 'S3' CAMS Scruitineer & needs to be done in the week prior to the event. Best to phone the CAMS office on (02) 6935 1366 for your nearest scruitineer, usually the local motorsport type workshop, or somoene might live in your area so you can just work out a time to go to them at their home or where ever.

Basically, scruitineering covers safety, such as

- front end/steering no wobbles etc,

- seat firmly mounted,

- battery firmly mounted,

-condition of seat belt, (a standard seat belt in a road car is fine)

- if you have a roll cage, you must use a harness type belt

-an approved helmet (for the speed /dirt events. 99% of helmets sold in Aus are legal)

- a fire extinguisher within reach that is secureley mounted(you can use strong/wide cable ties to mount the bracket if you dont want to drill holes, but DONT cable tie the extinguisher in!)

- & a secondry bonnet latch (an occy strap or a belt through the handle is fine)

-also a blue triangle 150mm sides to show battery location(blue elictrical tape will be fine) for the lap dash.

-you will need long clothing too

Scruitineering will also be available on the day of the event in the morning, but you might have to wait in a que for a little while... please put a note on the registration form if you will need to be scruitineered on the day, & that you are from SAU

If you have any other questions about anything feel free to PM me or post them on here

Edited by frogman
NYTSKY Grand Master

NYTSKY

Posted
Posted
Awesome Dave!

I did it today :domokun:

and intune has entered the khana - I'll see how I go on the day and if the wallets good and there are spots, I'll do the khana also

I hope my wallet is ok for next week,i think ive spent nearly 3k on the car this month.And the motor isnt even out yet????

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...