Jump to content
SAU Community

Recommended Posts

hi, i been trying to search but havnt come up with anythin, i would like to know if anyone has got rid of all that platic n rubber intake and changed it to metal or different piping? or if it is possible? i have got a NA r34 and want to get rid of all the stock intake because since i fitted my extractors some of it is now startin to touch the extractors. Any info/links would be good

Link to comment
https://www.sau.com.au/forums/topic/207358-metal-intake/
Share on other sites

yeh i know the actual piping to be made up wouldnt be hard so thanks for that comment, but there is like plastic thing connected to the piping looks as if it just holds air and i have heard if u replace with a metal pipe u lose power that is y i was askin if anyone else had done it or any info on it

Link to comment
https://www.sau.com.au/forums/topic/207358-metal-intake/#findComment-3669738
Share on other sites

since the original post on this topic, I have done this modification to my R33, it now has a 3" mandrel bent intake pipe.

I can't say you will loose power but you will loose a bit of low end torque and fuel economy, but on the up side the intake noise sounds awesome at high revs :(

Link to comment
https://www.sau.com.au/forums/topic/207358-metal-intake/#findComment-3670517
Share on other sites

Rach, you know people are gonna be asking for pics so if you can that would be great.

I'll probably have more questions for you after seeing your setup as I too am planning the metal intake pipe except I will be swapping out the 34 NA airbox for a 34 turbo airbox. I also am yet to have my headers and custom exhuast done.

Link to comment
https://www.sau.com.au/forums/topic/207358-metal-intake/#findComment-3671312
Share on other sites

righto here are a couple of pics, nothing fancy under the hood might look a bit weird with the heater wrap around the intake pipe, but ithere's a practical reason for it, it stops the heat soak issues I was having.

post-5803-1203913313_thumb.jpg

post-5803-1203913440_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/207358-metal-intake/#findComment-3672379
Share on other sites

Your catch can is installed incorrectly.

yep I know, it was set up like this by my mechanic and it was set up wrong, it does absolutly nothing the way it is set up, I'm looking into getting a bigger Catch can (2L) that is suitable for motorsport use, and getting it installed properly so nothing is vented back into the intake, but the problem is to find a place that has enough room for it to be mounted.

Link to comment
https://www.sau.com.au/forums/topic/207358-metal-intake/#findComment-3672904
Share on other sites

Correct Install

PIC HERE

many high ranking sau members seem to think this is the way to do it.. Seems that the reason is because at low speed and off boost the pcv is sucking air in through the catch can.. solving nothing

I think your method is best use in a atmospheric venting catch can

Edited by DECIM8
Link to comment
https://www.sau.com.au/forums/topic/207358-metal-intake/#findComment-3675055
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...