Jump to content
SAU Community

Recommended Posts

Hi all, i want to lower my 33....

i need new shocks and was recommended to get Pedders Shockies....(GSR - was the model or something).....

anyway.....i dont want the ride too stiff...and i want to lower the car.....

so would i be best just gettin some pedders lowering springs with the shocks or what?

is there a better combination of springs (ie king's or another) and shocks (blistein, pedders, etc, etc..)?

so yeah, basically need some advice.....not too sure on coilovers as they can be a bit pricey...

any help or advice is welcome...

Cheers

Matt

Link to comment
https://www.sau.com.au/forums/topic/207470-wanting-to-lower-my-33advice-needed/
Share on other sites

please read this ... http://www.skylinesaustralia.com/forums/R3...ils-t85467.html

settings and so on are done by SK <--- not a mechanic but he sure knows his lines :laugh:

if you want a great daily and a capable track weapon get some of these

just stay away from super low suspension! i had king super lows in my old corolla for about 3 weeks before i took it out. handled twice as bad as stock.

i also had pedders sport rider suspension (or something like that). it was meant to be the equivalent of lows but it turned out that the springs were standard height.

my friend has the nismo tuned s15 and it handles beautifully. it absorbs all bumps as standard yet eats corners for breakfast :ermm: . are there any nismo springs (not coilovers) available for the r33? i have only had mine for about 2 weeks so i don't know that much about them yet

coilovers arnt that expensive?

i can justify spending abit over 1000 for them

if your not going to use your car for track then a cheap set will do ya

they handle much better and there adjustable, so you dont have to swap everything if you get defected

check the thread I posted above ...

its engineered to suit aussie road conditions :D

it height adjustable also!!!

swaybars make the biggest difference to your cars handling if you want your car to handle better the get some new sway bars if you just want it to look good then lower it.

+ everything in there is legal even the bushes and things :no:

best setup for your car if you are going to be using it mostly for a daily ;)

Edited by BLK33T

tien are good. but your paying for the name,

only good thing about them is you can get edfc thats if your lazy

i cant see why hsd cant do the same job

you can literally sit your can on the ground with them

still adjust the stiffness and camber.

I was told Pedders were shit... Yeah No Bull...

If ya get aftermarket shock, you are going to have a hard ass ride. My Cuscos are at the softest setting and still hard. Maybe which ever set of aftermarket suspension you get, make sure you can adjust the damping / Soft-Hardness I guess... :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, the trouble with that ^^ is: The configuration shown is absolutely a 1-way, not a 1.5-way. There is no way that a 1.5-way can be said to offer LSD action only on acceleration. If Nismo cannot get that right, then it is impossible to believe their documentation. That ^ is not a 1.5 way setup. That is a 1-way.   And so now I have allowed all doubts to flourish and have gone back to look at the MotoIQ video. I originally made the mistake of believing him when he said "this is a 1.5-way" at the ~6:10 mark. Because what he did was take the gear assembly out of the 2-way opening and just rotate it one place to the left to drop it into the 1-way opening. When he dropped it in there, the cam was "backwards" compared to the correct orientation shown in all other photos of that config. The flat shold have been facing the 1° ramp side of the opening, not the 55° ramp side. And I thought, "gee that's cute", but I was concerned at the time, when he put the other ring back on, that the gap between the rings looked like it was wider then in the 2-way config. And then I said a lot of things in my long post on Tuesday that could only make sense if the guy from MotoIQ was correct about what he'd done. BUT... I have now done my homework. I grabbed a frame of the video with the 2-way config, and then grabbed another with the "1.5-way" config, snipped out the cam and opening of that frame and just pasted it direct on top of the 2-way config. I scaled it so that the triangular opening was almost exactly the same height in both. AND.... the gap between the plates is wider with the cam installed in the triangualr opening backwards. That is.... it cannot go together that way. There would be massive force on the plates all the time, if you could even reassemble it.  So, My statement on the matter? The Nismo diff is actually only a 2-way and 1-way. There is no 1.5-way option in it, regardless of what they say. Here's a photo of a real 1.5-way ramp opening from Cusco (along with the 1 way option). And the full set of 1 through 2 way options from their racing diff, which is not same-same as what we'd typically be using, but...the cams work the same. A little blurry, but it comes from this Cusco doc, which is quite helpful. AND.... Cusco do in fact do what I suggested would be sensible, which is to have rings that do 1 and 1.5, and 1.5 and 2. Separately.  
    • Welcome Adam. Car looks great!
    • "With a 1.5-WAY, the LSD is effective only during acceleration."
    • Well it wasn't as easy as I thought.... and it also wasn't in my original manual which I did end up finding. They discuss the process in the Nismo catalogue though and it requires slight machining. Page 145.  NISMO PARTS CATALOGUE 2020
    • I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
×
×
  • Create New...