Jump to content
SAU Community

Recommended Posts

Its time for v8 drivers to get with the times and strap some technology onto the v8s..

then they will feel the wrath...

all alloy, cross bolted and ribbed construction.

4 cams.

4 valves per cylinder.

6 bolt main caps.

FORGED steel crank and factory blueprinted internals.

techy enough for you? :P

damn toyota V8's.

turbo + v8 = best compromise between the 2 options. I'd love to see what a turbocharged lexus v8 would be like in a skyline chassis.

personally id go for a hybrid nissan V8.

VH architecture, 4.1 litre block, and 4.5 litre pistons, rods, crankshaft and custom camshafts.

why the 4.1 litre block you ask? superior design. why the 4.5 litre internals you ask? they fit right in. so why the hell not?

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

I really badly want to put a VK56 5.6L quad cam V8 from a Nissan Titan truck in my 33...

I'll quote myself in case you missed it... 4.5L? nah go the 5.6 ^^^^

screw the Toyota v8... these things are making 400hp+ with just some cams... and the torque... oh the torque... and the sound of a tuned quad cam V8... oh god

  • 1 year later...

haha v8 lovers,i drive r32 GTR pretty much stock juz a pod filter. i drag a couple of v8s on the streets, but havnt really clock it over a 100km. i havnt lost to any v8s before, but if i take it to the legel drags then it will be a different story!.

i beat the street v8 by around 4 to 5 car length! believe or not.

v8s lovers on streets are shit. Most of the v8 was design for road use like u see on the street, and im not talking about v8 supercars.

The GTR was made for pure racing as you can see, obvously they are powerfull.

[/quote

BAHHAAH that made no f**ken sense

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...