Jump to content
SAU Community

Places That Sell Helmets In South Eastern Suburbs (bentleigh/moorabbin Areas) Or Richmond/burnley Area?


Recommended Posts

Hi,

I'm looking for a half-decent helmet for the occasional track event, I've had a look at Kawasaki motors on Nepean Hwy Moorabbin but there cheapest helmets were $300 and the one that fitted well was $350.

Just wondering if anyone happens to know a place that sells helmets pretty cheap in either Bentleigh/Moorabbin area, and are hopefully open Saturdays or afterhours.

Or anywhere near Richmond or Bunley area, anywhere near work where I can slip out during lunch is good :D

I'm aiming to spend less than $200 if I can, I will consider buying second hand if I see a good helmet :P

Also, are there any particular standards I need to look out for? I've heard of snell (spelling?) and ADR standards for track events, I believe the helmet can meet *either*.

The helmet will be used for the occasional track event, as in once every 3-6 months so I don't think I need a really high quality helmet, I just want something decent.

EDIT: Opinions on what a reasonable price is for a helmet would be nice as well :D

Regards,

Gareth

Gareth, why don't you try the motorbike shops along elizabeth street in the city? They give reasonably good deals. I've seen helmets being sold for less than $200 there. No point getting used helmets. Imagine someone else's sweat will be on your head when YOU sweat... :D

Gareth, why don't you try the motorbike shops along elizabeth street in the city? They give reasonably good deals. I've seen helmets being sold for less than $200 there. No point getting used helmets. Imagine someone else's sweat will be on your head when YOU sweat... :P

Well obviously I didn't know those shops existed :D.

Excellent idea, I'll slip out during lunchtime next week and see whats available in my budget category :D

I should also check if they've got that quality 5.1 brake fluid, like the Motul RBF600 or Lucas RBF600 racing fluid, maybe I can get a deal on them :bunny:

The place I checked was $30/500ml for Motul so a little expensive.

According to the CAMS apparel info I found, helmets must match any of:

AS1698 - Australian standard

Snell SA95, SA2000, SA2005 - USA standard

SFI Spec 31.1, 31.2, 31.1A, 31.2A - USA standard

SFI Spec 24.1 - see Note (i)(d) - USA standard

E22 (with 03, 04 or 05 amendments) - European standard

BS 6658-85 Type A and A/FR (incl. amendments) - British standard

8860-2004 - FIA standard

So I think buying a motorcycle helmet should match one or more of these and I'll be fine :laugh:

Thanks for the good ideas so far!

Regards,

Gareth

Gareth, why don't you try the motorbike shops along elizabeth street in the city? They give reasonably good deals. I've seen helmets being sold for less than $200 there. No point getting used helmets. Imagine someone else's sweat will be on your head when YOU sweat... :)

On the money, Elizabeth St has plenty. Try and get there at a weekend as the selection is plentiful :)

revolution race gear, nunawading, they know what there talking about, ive done lots of track days on bikes and cars, with co drivers, and one thing i can say is, bike helmets are great for when your in the car alone but if you have a co driver/instructor with you open face is the way to go, you cant hear what they say with full face helmet.

Well obviously I didn't know those shops existed :laugh:.

Excellent idea, I'll slip out during lunchtime next week and see whats available in my budget category :D

I should also check if they've got that quality 5.1 brake fluid, like the Motul RBF600 or Lucas RBF600 racing fluid, maybe I can get a deal on them :P

The place I checked was $30/500ml for Motul so a little expensive.

According to the CAMS apparel info I found, helmets must match any of:

AS1698 - Australian standard

Snell SA95, SA2000, SA2005 - USA standard

SFI Spec 31.1, 31.2, 31.1A, 31.2A - USA standard

SFI Spec 24.1 - see Note (i)(d) - USA standard

E22 (with 03, 04 or 05 amendments) - European standard

BS 6658-85 Type A and A/FR (incl. amendments) - British standard

8860-2004 - FIA standard

So I think buying a motorcycle helmet should match one or more of these and I'll be fine :D

Thanks for the good ideas so far!

Regards,

Gareth

Dude,

dont worry about UK standard, USA standard, India Standard, China Standard. As long as you see that silver sticker with 3 or 4 ticks on it, that'll be fine :kiss:

Yeah, spend the $$ on a really good one.

Often they are

1. Lighter

2. Cooler

3. Better visors etc.

All things that factor to a comfy helmet as some of the cheap ones, after 30mins, feel like a brick on your head :)

you need to decide what activities you will be doing, how long these activities require you to have your helmet on, and how often you will be doing these activities.

if you are only gonna be doing a couple of quarter mile runs a year no need for big $$$ helmets as you only have the helmet on for short amount of time.

on the other end of the scale, if you will be wearing your helmet for hours at a time like bike riding, go for big $$$.

Thanks for all the replies I'll try and check some of those places out.

I will be wearing the helmet a bit but not that much, 20mins at a time (at least) on the 15th March, but for most of the day :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...