Jump to content
SAU Community

Recommended Posts

G'day

I have just bought a R32 GTR it has been sitting in the shed for a couple of months whilst I get a few small things fixed up for rego. I have been starting it and taking it for a quick blat up the road every couple of weeks. The battery in the car is dead so I have been jumpstaring it to get it started. Today I rolled the car down my driveway (slight hill) in reverse and dropped the clutch. The car backfired and it didn't start, I noticed a clicking noise coming from a black box near my abs unit (I have never heard this box click b4 in my life) So i turned the ignition off, then back on and the clicking went away.

I tried to jump it like I ususally do and It would backfire every 6 th revolution of the crank (I think). Then I put another battery in the car (which I know is good) and all It would do was backfire and want to start but it never did. I notice smoke coming from the 4th coil pack so i quickly turned the car off and disconnected the coilpack. One side of the coilpack had blown out and it was F*king hot as.

The car has 1/4 of a tank of fuel, refueled 2 weeks ago

It is getting fuel to the fuel rail

The compression of the car is within specs as I did that 2 weeks ago

It was getting spark to the front two coilpacks didn't check the other 4 as the 4th one shit its self.

Has anybody got any ideas as to what has happened to my car?

Possibly the Clicking noise Near your abs is one of your relays are stuffed that is in the black box attached to the ABS pump?? I have a problem with my ABS at the moment and the Red light in the Boot flashes saying it a ABS motor relay so i go out and replace the Relays (Expensive from Nissan so find one on here if ya can!!) and the Light still illuminates on the dash so got me F3cked on what it is!!! And when the turbo timer is running there is some constant clicking noise like a solenoid or some crap clickin but only does it when the turbo timer is running not with the key in the ignition!!!!!

With your other Problem i'm not sure what it is! Maybe try some new coils!

Possibly the Clicking noise Near your abs is one of your relays are stuffed that is in the black box attached to the ABS pump?? I have a problem with my ABS at the moment and the Red light in the Boot flashes saying it a ABS motor relay so i go out and replace the Relays (Expensive from Nissan so find one on here if ya can!!) and the Light still illuminates on the dash so got me F3cked on what it is!!! And when the turbo timer is running there is some constant clicking noise like a solenoid or some crap clickin but only does it when the turbo timer is running not with the key in the ignition!!!!!

With your other Problem i'm not sure what it is! Maybe try some new coils!

Thanku both styline gtr and aliturko. Please keep the helpful tips coming.

Hey, I still can't start the car I fried my ecu. I put another ecu in today but she still won't start. I have borrowed a coilpack and bought another wirring harness. I am going to replace all the coilpacks and I hope that fixes the problem because if not I am going to have to take it into an auto elect so they can have a look at it. Is it possible for a timig belt to jump a tooth, doing a clutch start? PLEASE ANYBODY GOT ANY IDEAS.

Hey, I still can't start the car. What I have done so far, I have replaced the

-coilpacks with super spark coilpacks

-spark plugs

-wiring ilum to the coilpacks

-brand new battery

-new battery terminals

-2nd hand computer.

I have also tried putting my crank angle sensor from my series 1 r33 and the ignition module onto my GTR. With no luck. Today I tried to retrieve fault codes from the computer but i kept getting code 55 which means every thing is fine. Obviously every thing is not fine. PLEASE CAN ANYBODY HELP

dude.....your guessing.....do you have spark at all plugs?check by unbolting the coils and stick plugs in them and watch them work....

do you have injector pulse???Check with a noid light....spark fuel air and bang bang it goes...theres no science behind it

Hi I feel like an idiot. I put my car on a trailer and took it to my local tuner, he found the problem it was my battery. I had put three different working batteries (tested each battery) and they couldn't start my car. Thanks for all those people who helped out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...