Jump to content
SAU Community

Recommended Posts

After shockingly noticing my stock boost gague almost reachng the +7 mark under "spirited" driving conditions, i decided that after doing the hard reads over the SAU forums, being the nub that i am with turbos, that close to 1bar wasnt the best boost to run on a stock R33 turbo ;)

So when the next Dyno day was organised in my area, i though it be a good plan to get a proper boost plot done over the entire rev range. Yeah, i could have bought a boost gague, or borrowed one but i didnt want to buy a shit one just to test it. Plus IMO its a little difficult to see whats going on when your driving. ;)

So anyway, on the Dyno for the 1st time. Wish i had have gotten it done in OEM form, then after each mod, but i didnt, so lets not worry :)

1998 R33 GTS25t

52,000km

HKS Silent Power Catback Exhaust

3" JJR De-Cat pipe (gotta love NZ)

3" JJR Split dump/front pipe

R34 SMIC

Apexi Power Intake

Stock "hi-boost" mod

SkylineDyno.jpg

Boy was i shocked when it crept up to, and surpassed 200rwkw. I was expecting high 180's-low190's. As that seemed to be the general result of previus R33's.

Ignore the stains, it deiced to rain later that day, i was excited with the result, but not THAT excited :yes:

And, the real reason for the dyno, the boost.

11.19PSi @ 5895rpm. I had decided that if it was over 11psi then i would do something about it, as i did NOT want to be at, or very close to the stock "limit" of 12PSi on such a low km turbo. Wanted it to last a little loonger! But im happy with the .19 extra. So here it will stay.

Boost plot pic wont show properly, so a brief description...

Dam does it spool quick, 8PSi by 2000rpm, then a steady creep up to 11.19PSi all the way to 6000rpm.

It hit speed cut on the dyno hence the sharp power drop, and a good foot worth of flame out the tailpipe. Ha. Love the RB.

Pretty happy with the result overall :)

Edited by gotRICE?
Link to comment
https://www.sau.com.au/forums/topic/208929-dyno-result-skyline-r33-25t/
Share on other sites

Just a small point of correction. Stock ECU doesn't actually have a boost limit...It has an airflow limit which is slightly different. The ECU doesn't even get a boost or MAP input...It looks at the maf (mass air flow) signal instead and if this gets too high it retards timing etc etc etc. The limit is also a function of rpm. As long as your air flow meter is in good condition and there are no leaks between it and you compressor inlet (ie extra air can getting in without the air flow meter registering it) you are pretty safe...Stock turbos get unhappy running above 12psi all the time though and will eventually give up...

Also the factory boost gauges are notoriously inaccurate..Get an aftermarket one...

Anyway glad you were impressed in breaking the 200rwkW mark...

.Stock turbos get unhappy running above 12psi all the time though and will eventually give up..

Yeah this is what i was more aiming at, what most people consider the stock turbos boost limit before it gets tissy :yes:

maybe i worded it poorly.

I'm a bit confused on a few things...

1) getting nearly 1400Nms?

2) If you hit speed/limit, how come it still goes past 7000rpms after hitting that limit? Looks more like a power/time graph ?

Anyways, anywhere around the 200rwkws is great, i know what it feals like (got the 98' too champ ;) )

I did a dyno run for the exact same reason as you too, and at the same level of mods.

Stopped at 12(ish) psi and got 196rwkws i think?

Now go get the Power FC and watch the smile on ya dial get even wider :yes:

LoL, you sound like a ecstatic new Skyline owner, or import owner :yes:

AWESOME to see someone happy with their car, its usually "f_ck me dry, my shits cutting out, dropping boost, using too much fuel etc"

Ride the happy wave ;) You only get desensatised, jaded and bored from here on in ;) :0

I'll be the first one to say it. I think your dyno might be a bit "generous", 213rwkw with stock management is a bit high imo. Also you say you did the high boost mod, that only atkes it to 7psi all the time correct? Unless you have a boost controller you cant go past that level, so is it really stock boost?

Not trying to rain on your parade or anything, just a bit confused.

Enjoy driving it either way!!

I'm a bit confused on a few things...

1) getting nearly 1400Nms? Divide it by the final drive :(

2) If you hit speed/limit, how come it still goes past 7000rpms after hitting that limit? Looks more like a power/time graph ? No idea :yes: Thats just what he said.

Anyways, anywhere around the 200rwkws is great, i know what it feals like (got the 98' too champ :P )

I did a dyno run for the exact same reason as you too, and at the same level of mods.

Stopped at 12(ish) psi and got 196rwkws i think?

Now go get the Power FC and watch the smile on ya dial get even wider :D

LoL, you sound like a ecstatic new Skyline owner, or import owner :D

AWESOME to see someone happy with their car, its usually "f_ck me dry, my shits cutting out, dropping boost, using too much fuel etc"

Ride the happy wave :D You only get desensatised, jaded and bored from here on in ;) :0

Yeah im stoked with it :O Skyline has always been my dream car, but i got stuck on the Honda scene, and fell in love with the Integra Type R and the track :wave:

I'll be the first one to say it. I think your dyno might be a bit "generous", 213rwkw with stock management is a bit high imo. Also you say you did the high boost mod, that only atkes it to 7psi all the time correct? Unless you have a boost controller you cant go past that level, so is it really stock boost?

Not trying to rain on your parade or anything, just a bit confused.

Enjoy driving it either way!!

Yeah i figured it is a little high. Its the way he runs it. Very strange, but thats the way hes always done it :s But when comparing it to other Skylines with similar mods, they were making high 180- mid 190's on the same dyno, so when "comparing" its still a fair bit more!

I barely take peak power as an indication, i tend to enjoy the gains per mod. But seeing as i was an excited little rabbit when i bout it, i modded it quicker than i could get it to the dyno :D

track it and find your MPH... Then i think you will realise the dyno is reading pretty high

I would have done it by now, but u figured trying to get a good time on the stock 205's was pointless! haha

I only just aqquired my Enkie RP-02's 8' and 9' a week or so before the dyno, so it was fantastic to be able to accelerate and actually move, rather than sitting on the spot wrecking tyres. Makes the car feel like a rocket ship after having the stockers for 6 months.

Cheers for the comments!

stock boost controller mod might give you 7psi, but the intake and exhaust mods (especially the decat) will increase that again.

maybe his ECU has been fingered while in it's homeland.

I did buy it completely stock.., but stranger things have happened i guess. Might even investigate it, but i highly doubt it. it didnt look like anything had been touched interior or exterior wise.

I would have done it by now, but u figured trying to get a good time on the stock 205's was pointless! haha

I only just aqquired my Enkie RP-02's 8' and 9' a week or so before the dyno, so it was fantastic to be able to accelerate and actually move, rather than sitting on the spot wrecking tyres. Makes the car feel like a rocket ship after having the stockers for 6 months.

Cheers for the comments!

Haha ahhh come on thats no excuse! Yeh the time would suffer but in fact your MPH will vary only ever so slightly one a run with great traction to a run with a terrible launch. In fact, 9 times out of 10 you worst launch will net your highest MPH at the traps.

Go out there and have a go, 215rwkw should be netting around 105mph im guessing?

Haha ahhh come on thats no excuse! Yeh the time would suffer but in fact your MPH will vary only ever so slightly one a run with great traction to a run with a terrible launch. In fact, 9 times out of 10 you worst launch will net your highest MPH at the traps.

Go out there and have a go, 215rwkw should be netting around 105mph im guessing?

Too true. Harden the F*ck up maybe? heheh

Yeah 105 sounds about right, i was trapping 99.9mph in my Integra R with 133fwkw, obviously wieght advantage.. but yeah. I think the local 33's trap around 105ish. I dont even think there is another drag day untill next season :D

wow, how light was the integra, a DC2R model? thats good trap speed. My r34 is trapping around 97 with 160rwkw, but its a porker!

Yaa DC2R. Such a beast of a car. Would own another one anyday!

Well, stock, they are around 1080kg. It was "track prepped" no interior, spare wheel etc etc, and 1/4 tank of gas. But added weight of huge calipers and rotors. Infact, that probly the heaviest thing, all the other mods, I+H+E would have reduced the weight a little. So probly similar to stock.

:):ninja::ninja:

Dont gimme that tone of voice :P Dont knock it till you try it hehehe.

R33silverS2'] [/b]what are your air fuel ratios like?

Didnt get a reading, was an extra $10 i SHOULD have spent :P Will get those next time, hopefully on a more accurate reading dyno. I know the other local dyno is more "true". But he doesnt often have dyno days, rather just uses his for tuning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...