Jump to content
SAU Community

Recommended Posts

Item:Hiper Gear TR43 Turbo, Tial 38mmExternal Gate, Custom Manefold for rb20, GTR injectors

Age:about 8 months old

Condition:very good

Price:$1000 Quick sale!(will separate for right price)

To Fit:RB20 ..... come off R32

Location:S/E Suburbs Vic

Contact:0433663833 for fast reply dont get chance to check this site to offten

Comments:Gear still in working order only come off car as going for 1jz power and found motor with all the bolt on's already

Pic's coming!

Thanks

(Just for Boosted 32 as he need hes hand held)

ofcourse you need more then just these mods to get to 300rwkw but hiper gears website reads this turbo is able to help your motor get to that power.... you will run around 220 rwkw with these mods a cooler and retune....

post-34936-1204793546_thumb.jpg

post-34936-1204793581_thumb.jpg

post-34936-1204793625_thumb.jpg

post-34936-1204793671_thumb.jpg

Edited by evlgtr
300kw for rb20det....Id like to see that, got a dyno chart to back that up?

.... saying the turbo is able to suport that power buddy...... as per there web site ... i was only runing 16 psi making 220rwkw with this setup (and cooler and retune) but with the right engine mods the turbo is ready to make that power so go pull urself off in someone else's thread.

unless keen on gear keep it to urself.

Edited by evlgtr

mate has one of these turbos.. car has plenty of torque on his rb25.. Good asking price :D

Edited by LTHLRB

I may be interested if you can show me a dyno sheet mate, id like to know how laggy the turbo is, when does it hit 16psi in say 2nd gear?

Also how much would u be after minus the GTR injectors?

wasnt being smart ot trying to wreck your thread! maybe u should think of how u word things before u post! I would still like to see some proof that these turbos will support 300kw

Developed for: SR20DET, RB20DET, RB25DET,RX7 or any other 2L or bigger engines. It is Rated at 440HP fly wheels standard ,or 500HP High Flowed. This turbo is good if you are chasing high top end and good responds. External Wastegate might be needed on engine sized 2L+ or high performance applications.

This is a high end performance turbo. The turbo responds is from about 2000RPM depends on engine type. This turbo is designed for track, Drift and drag racing. The max recommended boost out put is no higher then 20PSI.

This is from the turbos website.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...