Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just then i went on my break and went and put some fuel in my car it was running on E so i went to the petrol station and then filled up with BP Ultimate

Car was boosting and driving fine before i put the petrol in. I drove back to work car started coughing and spluttering and then just conked out and stalled and now i cant start the car at all.

If i leave it for 5 minutes and start it, it kicks over then stalls. I need help as i need to get home from work!

Anyone who can help me out would be greatly appreciated.

Thanks

Trent

Link to comment
https://www.sau.com.au/forums/topic/209326-put-fuel-in-now-car-wont-run/
Share on other sites

sounds to me like you may have picked up a shit batch of fuel.It may have clogged your filter or even have stuffed the pump itself. I had a similar problem a few years ago with a VN that I had. Pulled the tank out and emptied it.So much water mixed in with the fuel.Other things too like grass,cigarette butts etc..

I agree, definitely sounds like a clogged filter. When you run your tank empty it brings up all the sediment and gunk from the bottom and stuffs the filter pretty quick.

Sorry i don't any quick fixes. Get it to a mechanic.

Good luck mate.

my 2c is that you let it run too low... the new fuel has stirred up the 15 years of shit in the bottom of your tank and then you boosted it str8 away and have now put all that mixed up shit in your fuel system... change the fuel filter drive off boost...

problem still there... see a mechanic or remove/empty your tank

If it is a clogged filter its an easy fix.

1. Change fuel filter.

2. Throw some Wynns fuel system cleaner in your tank.

3. Disconnect spark, turn car over a few times to get fuel in the system.

5. Reconnect spark, and away you go.

If you cant hear the pump though its probably stuffed, what sort of pump is it ho old?

If its the standard one, you should get a fresh one anyway.

problem solving time. ok.

1. possible bad fuel. but if so u shouldnt have gotten out of the bp driveway before stalling

2. blocked filter...possible. however the fuel pump has a filter sock that should filter out the larger debris.. so replace that.

3. might be a stretch...but check the fuses. especially the fuel pump fuse. u said it wasnt priming. so it is either broken...or has a broken circuit..

then run some injector cleaner thru

Edited by r33cruiser

Pump is a GTR item, Issue is it was running sweet before this started then fuel was in then BAM and the issue starts..

Looks like car will stay here overnite then i'll have to coem back tommorrow with some tools and shit :D

I got NFI on cause, but would just try the remedys ppl suggested above.

Something interesting though i think, is that only a few weeks ago, i manually scooped 1/4 tank of fuel outa my "89 GTR. After a lot of looking around, rubbing etc... the tank was spotless, none of the shite ppl tank about.

Have a S14 mate who swears all Silvia's get so much gunk in the tank... not my older Skyline... i figure mines been flushed at some stage? hrrm..

*keeps on rolling*

Edited by GeeTR

for gods sake people... the fuel pump pick up is at the bottom of the tank... regardless of if you run a full tank or on the fuel light, the pick up is still collecting the same quality of fuel. Not to mention the filter sock on the pump is so fine it would bearly pick anything up to clock tjhe fuel pump instantly... that sort of stuff takes years to accumilate shit into a filter

for gods sake people... the fuel pump pick up is at the bottom of the tank... regardless of if you run a full tank or on the fuel light, the pick up is still collecting the same quality of fuel. Not to mention the filter sock on the pump is so fine it would bearly pick anything up to clock tjhe fuel pump instantly... that sort of stuff takes years to accumilate shit into a filter

Thankyou.....

About to say the same thing.. I run my tank empty often with no problems... Changed the fuel filter on Monday (after 40000km's since compliance) and it was very clean....... BP Ultimate FTW

Yeah thanks to all who helped out.

Pulled out the tank at work in bollocksen boiling hot heat found out ti came outta its cradle and had detatched itself form the power. Fun!

Then the O Ring streached out so much that i had to cut it to fit it back in lol

Anyway its fixed now, all ig tota do now is fix my exhaust leak sound like a bollocksen rexy..

Yeah thanks to all who helped out.

Pulled out the tank at work in bollocksen boiling hot heat found out ti came outta its cradle and had detatched itself form the power. Fun!

Then the O Ring streached out so much that i had to cut it to fit it back in lol

Anyway its fixed now, all ig tota do now is fix my exhaust leak sound like a bollocksen rexy..

that makes... no... sense.... what so ever!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...