Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Recommended Posts

Just had my Stagea ecu done by Toshi

can confirm that it works, for sure

interstate job, so we havent met face to face nor has he seen the car

he got in an adapter, a large ecu chip that he did his majik on, and arranged (for me, so happy!) to have the adapter properly installed when my local mojo's didnt want to do it.

got the ecu back in time (today) for my dyno tune of safc/sitc tomorrow.

feels good to drive atm, the retune on dyno of the piggybacks will make it awesome Im sure

Hey Toshi.

I live in Sydney and have an R34 GTT.

Its stock but will a remap have any benifits?

And how much?

Thanks mate.

Dave

Edited by wisey18

Hi Dave

How is muffler?

All stock?

I think you need boost controller.

Normaly about 15kw-20kw more than std ecu.

You will get 185kw-200kw at 10-13psi.

Thank you

Hey Toshi.

I live in Sydney and have an R34 GTT.

Its stock but will a remap have any benifits?

And how much?

Thanks mate.

Dave

Hi Dave

How is muffler?

All stock?

I think you need boost controller.

Normaly about 15kw more than std ecu.

Thank you

Muffler is stock.

Havn't got a boost controller yet but will be getting one.

OK

Please fit boost controller.

If you fit turbo back muffler and hi flow cat you are able to get around 195kw at 10psi-11psi.

Muffler is stock.

Havn't got a boost controller yet but will be getting one.

hey toshi

i have an rb25det r33 skyline series 1 with following mods going in next week

Garrett GT30R (GT30/40), custom top mount manifold, dump pipe and ext wastegate

sard fuel preasure regulator

sard 550cc injectors

z32 afm

car already contains front mount, full exhaust , bigger fuel pump.

all i am mising is a good tune..can you do this or would i best off using a apexi power fc

i am located in sydney, parramatta. cheers

Yes, I am able to remap.

Cost road tune$550.

RB25DET std engin is up to 370, 380 hp (about 280KW) safe.

If you want to more power I think you need change after market engine parts (piston , crank shaft etc).

If you change to smaller turbo you do not need change injector. (RB25det injecter is up to 360 370 hp max)

Is this race car?

Toshi

hey toshi

i have an rb25det r33 skyline series 1 with following mods going in next week

Garrett GT30R (GT30/40), custom top mount manifold, dump pipe and ext wastegate

sard fuel preasure regulator

sard 550cc injectors

z32 afm

car already contains front mount, full exhaust , bigger fuel pump.

all i am mising is a good tune..can you do this or would i best off using a apexi power fc

i am located in sydney, parramatta. cheers

no it is not a race car just street. i dont want to rebuild engine yet so i will be happy for about 260kw can you achive this?. i want the boost to come on early so not much lag can you do tune for this? pm me your mobile number if you can thanks toshi

hi toshi

i've got r33 s1 wit the following mods

front mount.boost controller.turbo back exhuast.safcii.splitfires coils.fuel pump.

gt30/76 and the only problems is its an auto.can you do anything?cheers tony

Yes, I can remap.

How is AFM?

Is this Z32?

hi toshi

i've got r33 s1 wit the following mods

front mount.boost controller.turbo back exhuast.safcii.splitfires coils.fuel pump.

gt30/76 and the only problems is its an auto.can you do anything?cheers tony

  • 4 weeks later...

R34 ECU map

R34 can not boosted up more than around 12psi.

Because ignition timing will retard around 12psi.

Its same R33.

Also if you will boosted up around 12psi , engine will ping at around 3600-4400rpm.

Because R34 std ecu ignition map is 3600-4400rpm very hi ignition timing for Australia fuel.

  • 4 weeks later...

Hi Toshi,

Since the Brisbane trip is a bit complicated with needing to do cars during the work week and you needing to fly up here. What other options do we have? ie. retune by mail?

I need some sort of retune as my car pings if I apply throttle hard between 3500 and 4500 rpm.

Running 10 psi, full exhaust, R34 intercooler, filter and walbro pump.




  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...