Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Toshi

Recommended Posts

People have question how much boost and how much power safe with stock internal engine.

Many Japanese tuner say RB20 around 240kw and boost 15.5psi also R33 RB25 around 260kw 15.5psi.

Safe max boost RB20 and R33 RB25 both17psi.

Because both engines piston is not strong.

Neo RB25 piston is much stronger and connecting rod is same RB26.

Link to comment
Share on other sites

The difference between dyno tune and TOSHI's dyno tune and road tune.

Its very hard to explain but my customer up load to 300zx forum.

300zx customer has quite tactfully summarised what I take pride in when I tune.

Let me quote from his first hand experience

"Funnily enough my mate just bought a 2 seater and has 270 rwkw, got the sheet to prove it and mine has 250 mine feels like it pulls harder from the toshi tune than his and the curve is smoother I can tell you that the mid range in mine is light years apart from his and both have the same mods, maybe his might make a bit more up top but mine feels shitloads quicker and better to drive especially when pulling out of corners."

Basically, importance is placed on practicality. I believe in real power rather than mere numbers.

Link to comment
Share on other sites

  • 5 months later...

Toshi planing to go to Brisbane in March.

Anybody interested in Toshi's road tune (also dyno tune)?

All Nissans include bolton turbo NISTUNE , remap ECU ,Power Fc ,HKS FCON

How to tune on road

I will fit wideband air fuel ratio meter(same dyno machine O2 sensor), and lap top computer, Gizzmo KMon Knock Monitor & Analysisor,before we leave.

While the customer is driving,I will sit in the passenger seat with my laptop.

Start with 2nd gear, winding up from 2000rpm-5000rpm to check car condition and datalog.I will make fuel and timing map then 2nd gear again to check air fuel ratio and engine knock.After making rough map on 2nd gear, we will go to freeway .With 3rd gear, we will be running on freeway from 2000rpm-3000rpm to check engine response and engine knock.Then next 3000rpm-4000rpm ,this will be repeated in increments of 1000rpm.If we find flat spot , slow response , laggy,engine knock etc I will fix and tune on freeway.

After I will drive myself for check and tune power and engine response.

If you would like to tune on dyno at 4th gear we go to dyno shop.

Take around 5-8hours.

Price $550 labur.

If you would like to road tune and dyno tune both , 1 hour dyno fee will not be included in the cost.

e-mail [email protected]

Ph 0410490049

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Toshi tuned my wife's z32, and my friends z32 in March. Both very happy with the results.

He also had another go at my z32, because last time I exploded a turbo outlet coupler and could not make boost.

I have a graph from an 'experienced' tuning house on the northside of brisbane, that says 284.9rwkw at 17ish psi.

I can tell you that at 16.5psi now, Toshi's tune would destroy the dyno tune in every aspect. Response, driveablilty, idle, fuel consumption. Everything.

The car is much, much faster now on Toshi's road tune. Not even slightly interested to know how many kw it makes now.

Because faster is faster.

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...
  • 4 weeks later...
  • 2 weeks later...

Hey Toshi,

I have a r33 skyline I need tuned mid to late this month, I've been recommended to go to you, it's mildly modified 90,000kms

Front facing plenum

FMIC

Garret 3582

External gate

3" turbo back

1000cc bosch top feeds

Billet rail

Tomei reg

Z32 AFM

r32 nistune ecu

Walbro pump

+ a few bits n pieces

I already have a r32 ecu with nistune daughter board fitted,ready to swap on arrival to tune, as I also have to fit my fuel system (excluding pump) and afm (made up a quick release plug to suit both already so it's a simple plug in arangment)

If you could get back to me with a message regarding a rough price that would be great and il try n work out a day that suits is both,

Cheers,

Gav.

Link to comment
Share on other sites




  • Latest Posts

    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
    • I don't believe you.
    • All jokes aside, OP they're just called R32 oem rims as you said. The Nissan engineers back in the late 80's loosely copied the design from the Koya Driftek which was designed and produced about 18 years later.
×
×
  • Create New...