Jump to content
SAU Community

Recommended Posts

FKNLOL

cunny funts

Dave, sexeh rims, I want! but with a black centre... you give me? :)

See you bastards next Thursday? Mine should be back on the blacktop by then, sans massive epic engine build...

Nah, doubtful, mine should be getting tuned then, the thursday after should be ok

good to see car is up and running... been reading alot about it.. nice rims and N1GTR hmmm not so nice rims... not what i expected to see on your car

They're not whats meant to be on there :banana:

They're temporary

Yup

So who is up for a meet up tonight :domokun:

Where from and to?

I have a 7am start tomorrow so depends where to and i may be able to come - although mines run in now :P

im having drinks at mine after skating... It's not planned but it always happens anyway...

if you're in the area, give me a bell :domokun:

Figure skating right? lol

My engine would be run in if i had to drive to your neck of the woods :P

Two issues i have with the car. The gearbox/engine sandwich not being installed means the heat from the engine transfers to the gearbox tunnel and then into the cabin. With no A/C yet, the cabin heats up very quickly.

The other is the gearbox itself. The syncros are buggered. Shifting into first at a set of lights sound like engaging a straight cut box, and if i downshift too fast into 4th it grinds. So i think a full box rebuild is on the cards after Powercruise.

Ill be heading out to Harry's Cafe at Liverpool at around 9ish.

Figure skating right? lol

My engine would be run in if i had to drive to your neck of the woods :domokun:

Two issues i have with the car. The gearbox/engine sandwich not being installed means the heat from the engine transfers to the gearbox tunnel and then into the cabin. With no A/C yet, the cabin heats up very quickly.

The other is the gearbox itself. The syncros are buggered. Shifting into first at a set of lights sound like engaging a straight cut box, and if i downshift too fast into 4th it grinds. So i think a full box rebuild is on the cards after Powercruise.

Ill be heading out to Harry's Cafe at Liverpool at around 9ish.

just watch the shift from 2nd to 3rd between turns 9 and 10. Thats where i broke mine last time at Powercruise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...