Jump to content
SAU Community

Recommended Posts

Hey guys,

As some people may know/heard the Stagea broke down the other night, had a rattle coming from the gearbox and wouldn't select any gears so i got it towed to a Transmission place. Blah Blah Blah. Got told the "Oil Pump in Transmission has blown up".

Question time:

1. Stagea gearbox is different to all other Nissan boxes being that its AWD RB25DET Neo?

2. Anyone know the Oil Pump Part No# for the Transmission?

3. Do you think you can get an after market one of these if so, where from?

Cheers,

Corey

Link to comment
https://www.sau.com.au/forums/topic/210419-gearbox-issues/
Share on other sites

Hey guys,

As some people may know/heard the Stagea broke down the other night, had a rattle coming from the gearbox and wouldn't select any gears so i got it towed to a Transmission place. Blah Blah Blah. Got told the "Oil Pump in Transmission has blown up".

Question time:

1. Stagea gearbox is different to all other Nissan boxes being that its AWD RB25DET Neo?

2. Anyone know the Oil Pump Part No# for the Transmission?

3. Do you think you can get an after market one of these if so, where from?

Cheers,

Corey

TRY WA Automatics on 94936080 ask for steve,good luck,only series 2 are different ,series 1 has A box most skylines,series 2 has B box tiptronic,cheer`s chuckie.

Link to comment
https://www.sau.com.au/forums/topic/210419-gearbox-issues/#findComment-3721451
Share on other sites

TRY WA Automatics on 94936080 ask for steve,good luck,only series 2 are different ,series 1 has A box most skylines,series 2 has B box tiptronic,cheer`s chuckie.

the car is currently at a workshop in osbourne park, and cant find this damn oil pump info anywhere :domokun: ohhh and yeah its a 1998 Series 2 Stag with Tiptronic Box

Edited by BunkyS13
Link to comment
https://www.sau.com.au/forums/topic/210419-gearbox-issues/#findComment-3721476
Share on other sites

the car is currently at a workshop in osbourne park, and cant find this damn oil pump info anywhere :domokun: ohhh and yeah its a 1998 Series 2 Stag with Tiptronic Box

what figures they quoting for rebuild ????

Link to comment
https://www.sau.com.au/forums/topic/210419-gearbox-issues/#findComment-3721553
Share on other sites

well ive had a few updates....parts $920 ex. japan (nissan said could take upto 8 weeks to get here) so im just grabbing a gbox from a guy i know. waiting to hear back from the warranty company for them to say they will pay the Remove and Refit costs. only catch is because its a 2nd hand box they remove just the gbox from the warranty and the rest stays.

Cheers,

Corey

Link to comment
https://www.sau.com.au/forums/topic/210419-gearbox-issues/#findComment-3730287
Share on other sites

Try Mike at MV Automatics is SA, he knows Nissan boxes better than anyone.

As far as I know all Nissan RWD autos are pretty much the same, minor variences only. R33GTST, R34GTT, Navara, Patrol etc

The ATTESSA doesn't make any difference to the internals of the auto, just the output shaft is different to accommodate the chain drive to the clutch pack.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/210419-gearbox-issues/#findComment-3730787
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
    • Did some FASTing ...got the impression that the actual part# was a moot point ; seems all of these hardlines for coolant are discontinued/NLA... like, I take it you're after the hardline that bolts onto to the manifold...that's NLA according to amayama & nengun .... ...just to clear up some confusion, they typically mounted the AAC valve to the intake manifold somewhere near a coolant passage, so the body of the valve heats up & holds it open when engine's up to temp - no coolant flows through the valve, it's a mechanical, thermal connection.
×
×
  • Create New...