Jump to content
SAU Community

Recommended Posts

Looking into fuel pumps at the moment. Have had quite a few quotes so far...

All the nismo, Tomei etc etc fuel pumps are all around the high $400 mark...

Sard slightly cheaper...

And then Bosch and Walbro around the $200 mark...

Would they be ok for around 300kws in a R33 GTR?

It will be a DIY so i know nismo would be the easiest to put in but for half the price its worth a bit of mucking around...

any ideas?

Or any one used these pumps, pros cons?

Have searched and had mixed results from all those pumps!!!

Or if anyone can get them cheaper or know where i could get them cheaper???

cheers

Link to comment
https://www.sau.com.au/forums/topic/210788-fuel-pumps/
Share on other sites

Personally i'd go Nismo or HKS. It's a little more but it's much easier to work with. Bosch are good (i have the 040, no complaints) but in R33's at least, can't reach the bottom of the tank and aren't as reliable on hard cornering, but i just don't dry the tank out so isn't an issue.

Also there's no cradle modifying with these drop in pumps. If you REALLY want to save money go Bosch/Tomei, but on a GTR especially you want something reliable and for an extra $200 you're getting an easier job and less to worry about down the track.

My 2c

Link to comment
https://www.sau.com.au/forums/topic/210788-fuel-pumps/#findComment-3726452
Share on other sites

Personally i'd go Nismo or HKS. It's a little more but it's much easier to work with. Bosch are good (i have the 040, no complaints) but in R33's at least, can't reach the bottom of the tank and aren't as reliable on hard cornering, but i just don't dry the tank out so isn't an issue.

Also there's no cradle modifying with these drop in pumps. If you REALLY want to save money go Bosch/Tomei, but on a GTR especially you want something reliable and for an extra $200 you're getting an easier job and less to worry about down the track.

My 2c

You won't save much money buying the Tomei when It's around the same price as Nismo and HKS

Link to comment
https://www.sau.com.au/forums/topic/210788-fuel-pumps/#findComment-3726473
Share on other sites

So many threads bout pumps, im getting dizzy :)

Its not that hard.

If you don't want to fiddle, cant use hand tools and want a solution you prolly wont have to think about… ever again, then slap ½ a G on a Nismo bolt in – Done, so simple, you'll forget which pump you have when asked.

If you live to tweak, can use hand tools, and don't mind playing around with things, then go the non bolt in option, and stick in your [iNSERT PUMP MODEL HERE] in tank.

The pump has NOTHING to do with G forces, fuel gauge etc blah blah. Clearly one needs to mount the pick up sock in the same location as factory… to get the same factory result. This means not using 2nd hand hay twine to tie the pump half way up the cradle support. It means thinking about line flex, material, line runs etc, as to not impact other systems.

/end rant haha :(

Edited by GeeTR
Link to comment
https://www.sau.com.au/forums/topic/210788-fuel-pumps/#findComment-3726514
Share on other sites

+1 nismo [and I am handy with tools]

U then, clearly possese a spagina, and like man tools :)

Jokes :nyaanyaa:

No worries = plug in. Save some $ = doit urself - if i was rich and had no care for mechanical symbiosis... id go Nismo too (and debate it black N blue)

Edited by GeeTR
Link to comment
https://www.sau.com.au/forums/topic/210788-fuel-pumps/#findComment-3727543
Share on other sites

Me, if I fitted a bosch, I'd weld up a frame that the bosch would sit in just like a std pump, then I'd get the frame bright zinc coated so it wouldn't rust etc then I'd be half happy---------but this would cost as much as a nismo in the end and be a bit more mucking about------------and don't tell me I'm overdoing it, I've fought my pedanticism all my life and lost every time.

If I didn't do it like that I'd be going down the road saying 'Yeah, I got a bosch, but I'm going to take it out and fix it up soon!!!' and would always be nagging/noring away at me until I did.

Link to comment
https://www.sau.com.au/forums/topic/210788-fuel-pumps/#findComment-3727786
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...