Jump to content
SAU Community

39 Degree Day Today - How Were Your Water Temps?


Recommended Posts

Hey guys,

Just a quick question for you all who were driving around in today's sweltering heat...what were your car's water temps while sitting in traffic?

My car hit 95 degrees sitting in traffic with the a/c on...which was rather worrying...whereas the previous day while at a track day at Sandown fanging away it only hit a maximum of 90 degrees...

At Sandown you had airflow flowing through your radiator etc... Sitting in traffic you have no airflow :(

Cheers mate...i know that...my temps on the track were good sitting around the 82-87 mark all day and that was because of the airflow at those speeds...

My concern here is how high my water temps climbed while sitting in traffic...and thats with a thermostat that works...new rad cap and a 40mm alloy radiator...

Well you need airflow, do you still have your thermo fan? Maybe you could fit a higher flow fan if you are concerned.

Having said that 95deg isn't a temp to stress about when there is a reason for it (sitting in traffic) and it only happens rarely on a very hot day in traffic.

Hey guys,

Just a quick question for you all who were driving around in today's sweltering heat...what were your car's water temps while sitting in traffic?

My car hit 95 degrees sitting in traffic with the a/c on...which was rather worrying...whereas the previous day while at a track day at Sandown fanging away it only hit a maximum of 90 degrees...

I hit 80 degrees with air con on in slower traffic and 70 degrees in places with more airflow, I do have problems with the fan so I was taking it *very* easy on the car.

i was hitting 90~ degrees with AC on sitting in traffic.

Whilst driving with ac on it sits at about 88degrees

AC off my car was sitting on around 82degrees

Im suspecting the AC with r134a gas conversion might be creating more heat in my car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...