Jump to content
SAU Community

Recommended Posts

blacksx - he wouldnt even be interested running on the falken's or the 595 rs'?

Yeah its a very quick car, regardless - if it were me I'd still enter and have fun!

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

I would love to have a go at this but I would be forced to go into Open class because my R32 Gtst has an RB25DET transplanted, and I would have my ass handed to me by the open class cars... Bugger.

Shameless plug: :)

This event sounds like a great opportunity for drivers in the Clubsprint class to use Federal 595RS and RS-R as they have treadwear ratings of 140 - 180 depending on size and are a pretty sticky semi slick tyre...

more info...

Even more info...

The bottom line is, that there has NEVER been division or a handicap system based on driver ability. "It goes against every funamental aspect of what motorsport has been developed on" Encouraging inexperienced drivers to pilot big power and inevitably not set up correctly cars above and outside there capabilities on a racetrack is a recipe for disaster

The entire emphasis on motor-racing isnt just about the driver or just about the car. Its a combination to see what talent the driver has to get the best out of the machinery that he is driving.

Here is another one for you; You are saying that drivers who are either paid to drive or paid for driver training are not allowed to run in both classes. Where does that sit Paul Kemal who i know a few workshops are asking if he can drive there cars for these style events... yes he races in a national class of motorsport (Aussie Racing Cars) and that does have sponsorship that supports the cars but he isnt paid anything to drive. This being the case, there shouldnt be any limitations for him to drive in either class?

Marty, I think you are speaking to a brick wall on the SAU forums. These guys know everything there is to know!

Maybe you should show them the way with Autosports!

Vote No.1 for Paul Kemal, Yes he is a Gun driver but he isn't paid a cent. It costs him plenty to drive in the series of his choice!

Marty, I think you are speaking to a brick wall on the SAU forums. These guys know everything there is to know!

Maybe you should show them the way with Autosports!

Vote No.1 for Paul Kemal, Yes he is a Gun driver but he isn't paid a cent. It costs him plenty to drive in the series of his choice!

Well before you start slagging off SAU how about reading what has been posted on the matter. :D The people running the event have made the ruling. I dont think anyone on SAU support it or encouraged it.

Show us the way, by all means. Nobdoy likes to be in the dark :)

Some of you guys that are considering not running should have a good hard look at the tyres that you are able to run in the clubman class. You would be surprised how well you may go.

Some of you keep saying they are 'street' tyres :ermm:

And you say cars will not go faster than 'xyz' on those tyres :huh:

Well the lotus that I often drive does 5's at Wakey, 15's at Oran on those tyres :D

That would relate to 41's or 42's around the creek :)

One day I would like to put a good set of slicks on the thing and see what it could do.

The car is able to run in clubman :D

I have driven the Green Goblin a couple of times over the years and have found it to be a pretty good thing.

I think people are being silly if they dont enter because their cars are slow on "XYZ...whatever tyres". There is plenty of fun to be had on lowly street tyres. They may not offer the grip a semi slick does...but big deal. If you are running in a street class called Clubsprint then ?!?!? Just get out there and have a blast

I'm about 10 days away from confirming my ability to run. Not sure what class, i think i would rather put on some semis and see what ultimately me and the car can do. Dont care if im less competitive in the Open Class... it will come down to dollars. Is entry the same for both classes?

As for the Lotus on street tyres other then semi slicks. Its stands to reason that it would struggle less then many Nissans/Mazda/Subaru etc on general performance tyres as they have big diameter wheels and low weight and cog compared to most cars. What size are the tyres/rims? Im guessing they are 17x7.5" or something which is basically what i run on my 1300kg Skyline :D

Exactly, I think people should just enter to have some fun.

My point re the Lotus Roy is that there are cars that are eligable to run in that class that can go faster than the 18's and 20's that some people are predicting. You want me to remember tyres sizes....ha I just drive the thing :D

Yes it has 17's and weighs just over 900kg and has an 1800cc toyota engine that has a tiny 200rwkw. It might have a weight advantage but it lacks power compared to some other cars.

I think on the day you are going to see some pretty impressive numbers punched out as I know a few people that are entering but have not been included in the official list yet.

Edited by Bozman1
I think on the day you are going to see some pretty impressive numbers punched out as I know a few people that are entering but have not been included in the official list yet.

I have only got 3 more forms that are not on that list and I dont think that the people you speak of are either of those 3 so I would suggest they get them to me asap :D

Some of you guys that are considering not running should have a good hard look at the tyres that you are able to run in the clubman class. You would be surprised how well you may go.

Some of you keep saying they are 'street' tyres :ermm:

And you say cars will not go faster than 'xyz' on those tyres :huh:

Well the lotus that I often drive does 5's at Wakey, 15's at Oran on those tyres :rant:

That would relate to 41's or 42's around the creek :)

One day I would like to put a good set of slicks on the thing and see what it could do.

The car is able to run in clubman :D

Totally agree, just beacause of the calibre of cars (and driver) should not deter possible competitors, its all about having a go and enjoying the event. Yeah sure there will be some competitiveness but that never hurt anybody?!?!

I say have a go and be part of a fast growing form of Motorsport here in OZ...

And Bozman1, stop setting the bar so high, hacks like me who have never done a lap of OP have no chance against 'professionals' like you... :D

BHDave,

Yep it Boxheadmr.

So are you or Anthony going to have a crack at Superlap?

I'm not as my car doesn't qualify for either category, rb25 swap so i'd have to be in open class and no cage so i cant be in open class....plus i really am a rubbish driver.

tmb considered it for a little while, but decided against it. He falls in the middle ground as well. He'd have to remove the cage, refit the interior and buy new tyres for street class, or get eaten alive on the straight in open.

Didnt realise that Open Class needed cages ;) I have a half cage so not fussed, but can see how it would hurt a lot of R32 owners who binned the RB20.

For the first few rounds of these events are Superlap not best to loosen the rules and allow as many competitors as possible? Then after a few events tweak the regs to suit the numbers and the people actually entering? From the events inception it would be ideal if you could draft regs loose enough to let as many runners as possible run. Attrition and those doing it for the first time will soon fall by the wayside as its expensive and takes a lot of hard work and hours to get the cars ready.

If a bump in displacement hurts the likes of R32 owners running RB25s etc. I wouldnt mind running against them with an RB20. Truth is on road rubber it will make them slower :)

Guest
This topic is now closed to further replies.



  • Latest Posts

    • If you get 12v at one of the relay pins with IGN on, and 12v at another for about 3 sec when you turn the key from ACC to start, then yes you can just earth the relay trigger pin. Just have a look at the top of the relay, it should tell you which pin needs earth when the 12v signal is sent (or if it's not clear, just post the pic and we can work it out). If you always have 12v at 2 pins with IGN on, they it is earth triggered by the ECU which makes it harder to fix (you really need to check the ECU pin is earthing when it should, and if so it is a wiring issue from there to the relay.
    • Tomei make a 1.5mm restrictor, I'd just use that.
    • Got the gearbox in and the front drive shafts.
    • Hi There I went through a rabbit hole of reading about Xenon headlights and the ADR regulations for having them installed. As people have been defected by running factory xenon I was researching in ways to make them compliant. Everyone always say needs to be self leveling and have washer installed, which I don't necessarily agree with. For this argument I'm using R34 as reference as I'm more aware on the construction of the headlight compared to the R33 Xenon, which may still be the exact same case.   For the self leveling clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles As you can see the bold text "these manually adjustable devices from driver seats" are fine to use. As Series 1 Xenon model headlights do have a 4 level adjuster on the right near the ignition (however not series 2) then these model are consider compliant in that argument.   For the Self Cleaning aspect of this argument clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles Now i can understand the argument that Xenon will need a washer as they are over 2000 lumens, but I clicked on the 12 at the end of that sentence and it takes me to the end notes which states R34 for headlight lenses are plastic, not sure if PL is mark as I don't currently have my skyline to confirm that marking is there. But could you not technically get a lenses with the PL marking on it and then get away with the argument that you need a washer. I went through a quick read of the adr and might have missed something else that may cause them to be non-complaint.    But wouldn't these technically be complaint headlights   Would love to hear other people input on this and shed some light   Edit In regard to the the washer portion I might be mistaken ADR 45 (which I believe is Regulation NO.45) states 12 cd (candela) I dont understand that portion in regarding to calculating the candela if anyone can shed some light. Otherwise I guess throw in a washer for the headlight and you definitely comply.
    • Took it to all Japan day, flogged the hell out of it and took it all, am a very very happy man  don’t know how that ended up in Greg’s thread before
×
×
  • Create New...