Jump to content
SAU Community

How To Fit / Remove R32 Gtr Front Lip?


Recommended Posts

Hi All,

As topic states, looking for any pics or specific details on how the R32 GTR lower front bumper lip actually is sposed to attach to the front bumper?

any help would be greatly appreciated.

cheers

Michael

Link to comment
Share on other sites

there are lots of gay little clip things in the bottom of the front bar, and you screw threw them. thre are also some little square headed bolts and you put nuts on them. it's a bitch to do with the bumper on the car. my advice is take the bumper off, attach lip then refit the whole thing in one hit. :teehee:

Link to comment
Share on other sites

Taking the whole front bumper off would be more of a pain in the ass to do then just removing/replacing the front lip with the front bumper on the car. Just jack the front of the car up, put stands under it then lay on your back and remove the 15 bolts that hold on the lip.

Link to comment
Share on other sites

Thanks for the help guys

just jacked up the front, jumped uder removed all the bolt/clip things and re-fitted them.

30 mins, so nice and easy. hopefully the splitter survives tomorrow at queensland raceway. lol

:blink:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • What’s wrong with 2.6 first gear? I’ve done lots of 2nd gear starts from almost a dead stop and it just requires more clutch slip. A 2.6 first gear would be easier than that. I feel like the stock first gear is only good for severe traffic congestion where you need to be able to do 5 kph idling in first gear. Out in the US 120 kph is a very normal speed to be doing on the highways. If anything it’s slow, I regularly get passed by CA highway patrol doing that kind of speed. Out in the desert and plains even 18 wheelers are doing 130-140 kph. I would be less down on the Getrag if not for the fact that they cost north of 10k USD used and you’ll spend probably another 5k on a rebuild at least. I got my FS5R30A from Nissan for 1.5k USD. The cost of building one is maybe an extra 3-4k if you keep it reasonable. The final drive change to account for the 0.793 6th gear is also a pain to deal with. 
    • Usually the lower mount has a thicker/wider side, see image of the right side of the lower shock mount. Don't see why a couple of washers wouldn't do the same job.
    • Counter opinon. Having both an OS gearset car and the getrag 6 speed, will take the 6 speed for the street all day long thanks. First gear on most gear sets are ASS, the bloody gear you spend heaps of time in on the street too.   I run the 4.11 and it is fine at 110, (not sure who gets to do 120)  I do find the gears a little short and doing a 3.89 setup.    Anyway back to your question, running stock LSD rear, love it. Tried an S15 helical rear, it was aweful. In the process of doing a quaife front on advice as part of the 3.89. Seems like a good option. Let you know     Car is 800awhp and mostly street.       
    • I do the online time trials to get silver (1mil credits). Currently the EG at Tsukuba I got 1:14.015. Show me what you got! (Don't take it too seriously I only use the controller, CBF setting up G29).
    • So I’m looking for rb20det sensor or rb25de. Is this possible that ka24de/sr20 also could work? How much teeth is for small box sensor? 21? Does diameter size vary between these gearboxes?  https://youtu.be/VPhkpdEH7Lg?si=uGF2tLuAM6Mb5LF2
×
×
  • Create New...