Jump to content
SAU Community

Truckie Couldnt See A Car In Front Of Him....


eMsta
 Share

Recommended Posts

seriously....how can you not notice a car stuck to your truck...there must have been smoke from the cars tyres and you would think the driver of the car would be tootin his horn like crazy.

i dont like those interstate truckers, they are always on a rush to meet their timeframe. I always stay behind the truck until theres enough room for me to boot it past them. not a fan of driving next to them.

Link to comment
Share on other sites

i dont like those interstate truckers, they are always on a rush to meet their timeframe. I always stay behind the truck until theres enough room for me to boot it past them. not a fan of driving next to them.

i do the exact same thing, never drive next to a truck

Link to comment
Share on other sites

It's pretty scary that he has no idea, never mind that he couldn't see it,

* there'd be the physical shock of the truck hitting the car he should be able to feel,

* the noise of striking the car,

* the noise of the car tyres squealing on the road,

* the truck labouring as it suddenly has to push over 1000 kgs of car sideways down the road.

There's also the fact he didn't seem to upset about it, he seemed to be angry rather than remorseful?

Look, my old man's a truckie, and I've driven a few in my time, and most of the drivers I know are amongst the best drivers on the road, but it's d**kheads like this that grab media attention and give the general public the impression that all truckies are drugged up maniacs.

And generally, the average driver who has an incident with a truckie has usually brought it upon themselves, eg, pulling in front of them leading up to a red light, because there's space - which of course the truckie has created, and needs to slow and stop his 50 tonne vehicle.

on the lighter side - Aussie cops - " oi, are you fair dinkum?" lol.

Link to comment
Share on other sites

Saw that on ACA... ...they played it up in the usual way...

Years ago I was with a mate in his truck and a car cut him off as we were coming up to a red light... ...We were in one of the long nose trucks...

So at the lights my mate kept creeping up on the car... ...and the car would move forward and they'd wave their arms out the windows and we'd move up closer again... ...and they'd wave their arms again... ...and move forward again... ...and we'd creep up again... ...wave arms... ...and they'd move forward... ...and we'd creep...

Then the lights went green and they took off like crazy...

And they were towing little 4x4ft trailer...

THAT WE NEVER SAW BECAUSE OF THE WAY THEY CUT IN FRONT OF US!!!...

I always give trucks plenty of room... ...And blast past them when I can... ...And I'll also drop back and flash my lights whenever I see one trying to change lanes to let them know I'm clear of their rear...

Link to comment
Share on other sites

In one of those long nose trucks, you can't see shat right in front of you. If the car was sideways, I doubt he saw it.

As for the noise, those trucks aren't quiet, if he was at higher revs, and it was an impact like that one in the tunnel, he might not have heard it.

The noise of tyres squealing should have been audible though, it's not a normal noise.

As for the truck labouring to push the car, I very much doubt it, you could throw another few tonnes in the back and it wouldn't notice, why would it notice a small tin can attached to the front?

I learnt to drive a heavy rigid (loaded to 16 tonne), and that's scary the first time you're out with other traffic. Car drivers don't appreciate how different it is until they drive one. I always thought I gave trucks enough space (I wish some of them would do the same), turns out they need more.

The truck driver should have been using his mirrors a lot for situational awareness, and then wondered where the car had gone when he couldn't see it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I'm in the market for 370GT.  I live in Canberra and not much available so I'm looking interstate.  Can anyone recommend an inspection service with expert knowledge of Skylines? Sydney, Melbourne and Adelaide (Elizabeth area)
    • A million years later, searching for something else I posted, I was reminded of this thread. I eventually bought a new gauge. Put it in using the same probe (which has been installed the whole time stopping the exhaust gas from coming out the hole) and.... normal service has been resumed. The old gauge was definitely broken. /semi-pointless closure.
    • They're available from Nissan! I was able to buy a GTR (R33) one.. relatively* recently. Perhaps this stopped now but I bought mine ... relatively recently. I believe the 300ZX one has a different knee-point which is more rear biased, which I think the HFM one echos.
    • Hey Team, A bit to unload here. Hello from New Zealand I have a 2009 Nissan Skyline 370GT ( Type SP ) Auto 7 Speed, that I've had since 2022 and have loved the car since. Its painted in its factory QAB ( White Pearl ) with the Impul front lip and rare boot lid/spoiler with woodgrain interior. Mods since I've bought it and installed: Stillen Gen 3 Long Tube Intakes Motordyne Shockwave Catback Exhaust JDM Skyline Taillights Fake carbon spoiler and front grill ( Will be taking off.... its cringe ) VR30DETT Transmission from the Q50/Q60 to hold up to 550 Foot pounds of Torque ( 753 nm ) reliable  Currently I plan to turbo the car and have all the parts needed ( Photo Included ), I have my tuning day set on August 8th and choosing EcuTek as my tuning platform. Two of my work colleagues has their 370Z ( Manuel ) and 370GT coupe ( Type SP - Manuel ) also turbo'd and they have inspired me to get it done I have prepped quite a wee bit for this, as I had done the VR30 transmission swap over to this car so that I can achieve my HP goals without torque being an issue. I've taken quite a cautions route, as im always thinking about the safety as well as performance with my build, I'd rather do it properly and not cut corners etc etc. Any who, I've recently picked up the AutoStrada cruise control kit with all the included cables/wires/instructions. I've been hella researching around and can't find much on the integration that it has with the ECU and/or system. the only reason why im asking is, because I'm getting EcuTek and one of them RaceRom features allows the ability to switch maps via the cruise control function, which I am currently in the grey area if this would add-on via the Canbus will allow me to switch maps or have the option to use Cruise Control to begin with ( showing up on the instrument cluster to advise Cruise Control being set etc etc )  Because of my model being Type SP, Cruise Control on these models was never an option from factory unfortunately.  Anyone here that is able to shed some light on if the Cruise Control via AutoStrada gives OEM ability over the cruise control. Would love and appreciate any response and/or assistance with this, also happy to answer any question about my build and ill try pitch in where I can. Warm Regards,  
    • I thought the only (new) BM57 that was readily available was the one that was a BM57 but with the wrong bias. HFM or someone's?
×
×
  • Create New...