Jump to content
SAU Community

Recommended Posts

Have a Turbodumb bleed valve set at 10lbs and works real good.

I love it.

OK, now it is time for insurance.

Some companies say that any LEGAL mods are fine.

Rang RTA to find out about it.

Top engineer (NSW) says "Any adjustable boost controller is illegal because it changes emissions."

So... Has anyone come across this before?

It will kill me to go back to the stock boost.

Has anyone else looked into this area re insurance etc and is there anything else that they could be able to void our insurance on???

;)

Link to comment
https://www.sau.com.au/forums/topic/21146-legality-of-boost-controllers/
Share on other sites

Boost controllers do change emissions, but you still may be within the legal limits even with increased boost. If you are that worried then book your car in for a test at the RTA.

It's not so much the boost controller itself that is illegal, but the potential increased emissions it creates. I think you should be ok though, a guy here (I forget his name) recently said that he had a gutted cat and it still passed the emissions test.

yep, afaik, if you change any part of the intake or exhaust you are potentially in breach of epa standards thus deeming your car unroadworthy by the RTA & defectable by the police.

finish your mods, get an engineers certificate and live without fear of defect fines.

the EPA i belive give out a plate.

now i'm not 100% sure on this... this is JUST MY understanding (before someone comes along and tell me i'm totally wrong)

Engineers

Like diffs... tailshafts... power upgrades vs brake's etc.etc.

For instance, can the body handle the 400rwkw, has the chassis been strenghened and all that jazz. All the mechanical side of the equation and ADR's. They dont care about EPA i believe.

EPA

That's the EPA bit. is the hitch.

To make a car fully compliant with aftermarket ECU's big turbos/cooler/pod/exhaust noise/extractors etc etc.

Then you have to go through the FULL EPA test, to comply with the ADR's in this area.

Now my understanding is that test is the same as what they put the new cars through.

All sorts of emission testing etc etc.

(this is where it hurts) This test costs approx $2500 and if you fail there is NO refund.

So it's something that's a fair bit of work and you need to have the car running A1.

Now like i said.

This is what i have been told by various people and i've put bits together to come up with the above.

I maybe ill informed, if i am then no doubt someone will correct me :P

Guest INASNT
Originally posted by RedLineGTR

sounds interesting..

u always say something like that :)

Humbla

y do u really care about epa or cops?? *** them both, its your car do what u like with it!! If it was up to the cops and epa we would all be driving around stock 1.5 litre 4 cyclinders which only to a top speed of 100 km/h.

Originally posted by Zombie

Stock R33 runs 7psi after 5k, and something like 5psi before 5k

you sure? i know mine was stock as a rock when i got it and i had it put on a dyno and they hooked up a boost gauge and it got up to an exact 10psi and i know of others 33 that was there on the day with no boost controller got to 10psi too

Originally posted by R31Nismoid

skyl9

did you have and exhaust?

if so then that's the reason. The boost rises to approx 9psi once you do a full 3".

no my car was stock.. part from a hks bov and a k&n flat filter

and the other 33 was stock part from hks bov and a cat back exhaust

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...