Jump to content
SAU Community

Recommended Posts

Have a Turbodumb bleed valve set at 10lbs and works real good.

I love it.

OK, now it is time for insurance.

Some companies say that any LEGAL mods are fine.

Rang RTA to find out about it.

Top engineer (NSW) says "Any adjustable boost controller is illegal because it changes emissions."

So... Has anyone come across this before?

It will kill me to go back to the stock boost.

Has anyone else looked into this area re insurance etc and is there anything else that they could be able to void our insurance on???

;)

Link to comment
https://www.sau.com.au/forums/topic/21146-legality-of-boost-controllers/
Share on other sites

Boost controllers do change emissions, but you still may be within the legal limits even with increased boost. If you are that worried then book your car in for a test at the RTA.

It's not so much the boost controller itself that is illegal, but the potential increased emissions it creates. I think you should be ok though, a guy here (I forget his name) recently said that he had a gutted cat and it still passed the emissions test.

yep, afaik, if you change any part of the intake or exhaust you are potentially in breach of epa standards thus deeming your car unroadworthy by the RTA & defectable by the police.

finish your mods, get an engineers certificate and live without fear of defect fines.

the EPA i belive give out a plate.

now i'm not 100% sure on this... this is JUST MY understanding (before someone comes along and tell me i'm totally wrong)

Engineers

Like diffs... tailshafts... power upgrades vs brake's etc.etc.

For instance, can the body handle the 400rwkw, has the chassis been strenghened and all that jazz. All the mechanical side of the equation and ADR's. They dont care about EPA i believe.

EPA

That's the EPA bit. is the hitch.

To make a car fully compliant with aftermarket ECU's big turbos/cooler/pod/exhaust noise/extractors etc etc.

Then you have to go through the FULL EPA test, to comply with the ADR's in this area.

Now my understanding is that test is the same as what they put the new cars through.

All sorts of emission testing etc etc.

(this is where it hurts) This test costs approx $2500 and if you fail there is NO refund.

So it's something that's a fair bit of work and you need to have the car running A1.

Now like i said.

This is what i have been told by various people and i've put bits together to come up with the above.

I maybe ill informed, if i am then no doubt someone will correct me :P

Guest INASNT
Originally posted by RedLineGTR

sounds interesting..

u always say something like that :)

Humbla

y do u really care about epa or cops?? *** them both, its your car do what u like with it!! If it was up to the cops and epa we would all be driving around stock 1.5 litre 4 cyclinders which only to a top speed of 100 km/h.

Originally posted by Zombie

Stock R33 runs 7psi after 5k, and something like 5psi before 5k

you sure? i know mine was stock as a rock when i got it and i had it put on a dyno and they hooked up a boost gauge and it got up to an exact 10psi and i know of others 33 that was there on the day with no boost controller got to 10psi too

Originally posted by R31Nismoid

skyl9

did you have and exhaust?

if so then that's the reason. The boost rises to approx 9psi once you do a full 3".

no my car was stock.. part from a hks bov and a k&n flat filter

and the other 33 was stock part from hks bov and a cat back exhaust

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...