Jump to content
SAU Community

Recommended Posts

I got my car dynoed and tuned running 2860-5's . Got 385kw at wheels in 2wd mode. (dynopack) .Standard internals ,standard cams. on my r32 gtr. Last time I raced ,managed a 11.6 with 250kw at wheels. do you guys think 10's possible with this setup. Standard weight, street tyres. running 1.64 0-60 ft times. Obviously there alot of factors that come into play, driver,track,etc... wanted to hear what people have acheived from experience with similar power output. the car is running a HKS F-con v pro with launch control and 4.3 gts4 ratio,also a front cusco lsd. really wanted to push a 10.8 if possible on standard internals..

thanks guys. could upload the dyno graph if i knew how.. = (.

Link to comment
https://www.sau.com.au/forums/topic/211501-10s-possible-with-this-power/
Share on other sites

I got my car dynoed and tuned running 2860-5's . Got 385kw at wheels in 2wd mode. (dynopack) .Standard internals ,standard cams. on my r32 gtr. Last time I raced ,managed a 11.6 with 250kw at wheels. do you guys think 10's possible with this setup. Standard weight, street tyres. running 1.64 0-60 ft times. Obviously there alot of factors that come into play, driver,track,etc... wanted to hear what people have acheived from experience with similar power output. the car is running a HKS F-con v pro with launch control and 4.3 gts4 ratio,also a front cusco lsd. really wanted to push a 10.8 if possible on standard internals..

thanks guys. could upload the dyno graph if i knew how.. = (.

easy 10's...i ran 10.34 with 398 AWKW weighing 1474kg plus a 105kg driver.

easy 10's...i ran 10.34 with 398 AWKW weighing 1474kg plus a 105kg driver.

impressive car you got there!. 398awkw.. what was your trap speed and 0-60ft times?.. what would 383rwkw or 454kw flywheel horsepwer be in awkw? 350?

we could of pushed more but standard internals and cams, plus No rod bolts..hopefully itll be enough . what rpm were you launching ? At the momment launch control is set at 7000rpm building about 11-12psi boost off the line. Revlimiter set at 8k. Any advice ,appreciated. Might race at the Import All-stars event next week , as soon as i do a 10sec pass ,ill be kicked out til I get a cage..so I want to make it count.= ) . Don't really want to put a cage in this car..

thanks

allen

if your really serious about drag racing you can hit a low 10 with that easy, dare i say it, pushing 9's

Sure in a rear wheel drive car,... I was only hoping for high tens.. = ).. enough for street car.

I have a r32 gtr drag car Ive been building for ages... running twin 3540 turbos.,1080 kgs . aiming for 8's so YES I am serious about drag racing.

as im from Adelaide and have no track to find out for myself,

my r33 gtst with a fully built auto running a 3k high stall.

current powers at 320rwkws. would that get me close to a 10?

thanks and sorry for the hijack

are'nt those turbos the same as r34 n1s?? sorry i just keep confusing the -5 and -7s

no 2860-5's are equivelent to 2530's and 2860-7's are suppose to be gtss's. It can get confusing ..then you got -10's ,2860'rs. :rofl:

impressive car you got there!. 398awkw.. what was your trap speed and 0-60ft times?.. what would 383rwkw or 454kw flywheel horsepwer be in awkw? 350?

we could of pushed more but standard internals and cams, plus No rod bolts..hopefully itll be enough . what rpm were you launching ? At the momment launch control is set at 7000rpm building about 11-12psi boost off the line. Revlimiter set at 8k. Any advice ,appreciated. Might race at the Import All-stars event next week , as soon as i do a 10sec pass ,ill be kicked out til I get a cage..so I want to make it count.= ) . Don't really want to put a cage in this car..

thanks

allen

133 MPH and 1.493 60' launching at 8000rpm with no two step. running a synchro gearbox on radials with no NOS. Engine was basically stock with forged pistons and ARP rod bolts, turbo's were HKS 2530's.

Are they running Allstars at Taupo or Meremere this year? I went to the Taupo event last year.

133 MPH and 1.493 60' launching at 8000rpm with no two step. running a synchro gearbox on radials with no NOS. Engine was basically stock with forged pistons and ARP rod bolts, turbo's were HKS 2530's.

Are they running Allstars at Taupo or Meremere this year? I went to the Taupo event last year.

At meremere this year...should be a huge event if teh weather agrees.. nz.. Heat Treatments not attending..on the boat to OZ. what are you aiming for now with the low mounts?

At meremere this year...should be a huge event if teh weather agrees.. nz.. Heat Treatments not attending..on the boat to OZ. what are you aiming for now with the low mounts?

running 9.9's now but only using 3 gears due to ANDRA regs. 9100rpm in 3rd gear gets me on the 140MPH limit for cars without a parachute. So i hold 3rd at 9100 over the line...hehe

I'd say you could hit a low 10 at Taupo, just be careful of stripping 3rd if the gearbox is standard, especially at that power :rofl:

But not at Meremere, the quality of the track up there is pretty crap, it's too slippery to be honest

Just trying to compare i ran 104 with a pretty bad 1.9 60ft due some old 032R's tyres that had gone off.. Haven't done a full pass yet not wanting to break into the 10's with a crappy 60 like that and not be able to bring it back out again till i cage it...

do any of you kiwi's know Joe Kyle...was giving him a hand at Taupo last year. Bit of advice helped him bring his 60' down. Nice fella.

Yes. I know Joe well...hes running my old power fc pro/z32afm. Hes got alot more power this year..560kw I think...but hasnt raced much this season. were you running 4.3 diff ratios? I took the car for a blast tonight , mate reckons it flys..but i can't feel that much..guess im getting use to the car. probably the max i should push on standard internals.

Yes. I know Joe well...hes running my old power fc pro/z32afm. Hes got alot more power this year..560kw I think...but hasnt raced much this season. were you running 4.3 diff ratios? I took the car for a blast tonight , mate reckons it flys..but i can't feel that much..guess im getting use to the car. probably the max i should push on standard internals.

STD diff ratio's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...