Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: R32 4 door

Milage: 90xxx on car, 67xxx on the engine

Transmission: RB25det manual box

Colour: Mazda Red

Location: Adelaide Hills SA

Complied? Yes

RWC supplied? N/A

Currently registered? yes, 3 months

Price: $20,000 ono $18,000

Contact: Email on MY EMAIL or PM me

Mods as follows

Suspension

-HSD HR Coilovers with 7 kg front and 5 kg rear springs

-R33 front LCA's

-Tein Castor rods

-new upper control arm bushes

-Rack spacers

-Cradle bushes + pineapples + cradle mods

-Driftshop Rear Camber arms

-Driftshop Traction rods

-Driftshop Hicas Lock bar

Engine + Drivetrain

-Series 1 RB25det with low km's, in awesome condition and serviced every 3 months, it doesnt get driven much really. Motor is faultless and has perfect compression, no smoke etc. Producing 280 rwkw on 17 psi boost

-Remapped RB20 ecu

-264 Cams

-ISC Cam gears

-S15 injectors

-FMIC kit (generic kind)

-GT 3071R turbo

-Exedy 5 puck Clutch with GTR pressure plate

-AM Performance engine cover

-RB25det gearbox + custom tailshaft

-Fully rebuilt 4.3 diff with rebuilt (1 month ago) Tomei Trax 2 way lsd

-conversion has been done properly, and as such, everything works

-no air con

-oil cooler and relocator kit

-Bosch motorsport 600 hp external fuel pump

-Malpassi rising rate FPR

Body/interior

-Painted by All Type Crash in Mazda Red

-Origin rear bar, Final Konnexxtion Skirts and Fibreglass GTR front bar with genuine lip and N1 Air intake slots with modified GTST bonnet

-front and rear guards flared professionally to allow wide offset wheels

-Bride seat - has wear but thats unavoidable

-Nardi 330mm steering wheel

-DRFT gauges with some Jap boost gauge

-has back seats and belts, along with child restraints etc, some rear trip pieces are missing but they arnt too hard to find these days.

-Blue LED dash

Wheels/Tyres

-Work Emotion XD9's in 17X9.5 +17 all round

-Maxxis MAZ - 1 on front, near new

-Neuton NT5000 on rear 50% tread

Extra info

-Car will be sold with 3 months SA rego

-Chassis is straight and accident free, i have had a few mindor panel rubs while drifting on the track but this has been panel damage only and all parts have been repaired professionally

-car is 100% reliable mechanically, i look after it well and do a lot of preventive maintenance, as such there are a lot of things that have been replaced on the car to bring it up to standard

-This is one quick car, and the traction is awesome, with 280 rwkw it moves and when taking off from a stand still it briefly wheel spins 1st then just grips in 2nd and 3rd and absolutely HAULS. There is no reason why this couldn't be a street driven car... i drove it around for 3 months every day as my daily but i got sick of the bucket seat. If i had a stock seat i prob would have kept driving it in comfort :cool:

-Lots of time and effort has gone into the suspension set up in it, its a highly competitive car on the track, but regardless, its well set up to have fun, just hop in and drive it!

-Dont be put off by the fact that this car has been driven hard, its built tough and tuned even tougher! Call my Tuner Jeff from The Speed Lab if you have any tune related questions.

-All stickers will be off the car except for the All Type Crash stickers.

-I dont have any current pics of it with the GTR bar yet, just the old Vertex bar.

Thats about it, im sure ive forgotten shit but most of its there, Massive thanks to the people who have helped out with this car!

I will consider swaps. After a 34 4 door with mods, if you think you have something suitable pm me.

Price is Negotiable. I am after 18K as the car is atm, However In the next few weeks i will take the turbo off and put a good condition RB25 stock turbo on, which will then be retuned to get the 220 rwkw i was on before the turbo upgrade.

I would take $15K for the car with stock turbo, 220 rwkw, a generic 3 inch jap exhaust, some other 17 inch wheels (not the XD9's) and stock cams and cam gears.

Pm me to work out a deal!

94257497plpz3ele080315gxl1.th.jpg

heres a pic, no rear bar on ATM, but you get the general idea.

Will be doing a nice photo shoot once bar is on and car is all cleaned up.

p4120144sw3.jpg

p4120148ke8.jpg

Edited by Simon-R32
  • 2 weeks later...

ahhhhhh... cant believe your selling this simon!!!!

Such a perfect setup car for just about everything!!!

you need to show new pics mate... looks so hot!!!

Edited by Twisted_SIL80

looks better with the rear bar on mate!! GL with the sale surprised you haven't had much interest in it yet!! Stick them stockies on it and drive it daily

  • 3 months later...

that 32 looks really tuff man, if i had the money i would buy it .

that pic of it on the track makes it look even better, u should print of, and frame, i would if someone took a shot of me like that lol

good luck with sale buddy.

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...