Jump to content
SAU Community

Recommended Posts

I wanna make my 1998 R34 RB25DE skyline faster....I heard it is very difficult to put a turbo in it...i don't know alot about cars butr i know so so amount...I need suggestions from u guys...what will make it faster...Because ive searched everything and its very hard 2 find parts for this engine....maybe because its a n/a engine...but im not sure plz help....Thanx :cool:

Youre in Okinawa, Japan, and asking us??? lol...

Well four principals - suck, squeeze, bang, blow... Induction, compression, ignition, exhaust....

Get a decent filter and cold air induction setup to keep intake temps down. HKS/Apexi filter in factory box is fine.

Up the compression by using a thinner head gasket if you wanna go through the trouble.

Some adjustable cam gears maybe, and tune your ignition timing...?

Grab a set of extractors, and a full exhaust with a high flow catalytic converter. Prob no larger than a 2.5 or 2 3/4" system.

For better launches, get yourself some steeper diff gears. Will give you more torque, but your revs will be a little higher as you are cruising around.

Should give you decent gains. theres probably heaps of stuf there that others will add to or correct me on.

Or.... post in the "naturally aspirated performance" for non-turbo mods, "forced induction performance" for turbo etc.

Youre in Okinawa, Japan, and asking us??? lol...

Well four principals - suck, squeeze, bang, blow... Induction, compression, ignition, exhaust....

Get a decent filter and cold air induction setup to keep intake temps down. HKS/Apexi filter in factory box is fine.

Up the compression by using a thinner head gasket if you wanna go through the trouble.

Some adjustable cam gears maybe, and tune your ignition timing...?

Grab a set of extractors, and a full exhaust with a high flow catalytic converter. Prob no larger than a 2.5 or 2 3/4" system.

For better launches, get yourself some steeper diff gears. Will give you more torque, but your revs will be a little higher as you are cruising around.

Should give you decent gains. theres probably heaps of stuf there that others will add to or correct me on.

Or.... post in the "naturally aspirated performance" for non-turbo mods, "forced induction performance" for turbo etc.

Shorter diff gears you mean.......like 4.3:1

no i mean steep... as in 4.11:1 is a steeper ratio than 2.7:1.

Kthx for just coming in and not actually adding anything useful to the thread. But hey, you tried :-)

and tried again...

want a diagram?

Anyway - Ryan, running a diff centre with a steeper ratio, will improve your launch. Same reason as how you have more pull in 2nd gear than in third.

You wont get very good value for money with any upgrades to the NA engine. ie. you'll spend a lot of money for even 20-30kw increase.

Your fuel economy will also probably suffer. Fuel economy would be the #1 reason to own a NA skyline IMO.

If you're not concerned about fuel economy, be aware that a turbo skyline will be a better option than modding your NA one.

It will cost less to sell and buy a turbo skyline than to increase the performance of you NA skyline to the level of a stock turbo one.

If you're just after mild gains then yeah, exhaust, intake, and maybe some tuning? but be realistic about how much power you want and whether you can live with the louder exhaust.

Something to think about. :P

I wanna make my 1998 R34 RB25DE skyline faster....I heard it is very difficult to put a turbo in it...i don't know alot about cars butr i know so so amount...I need suggestions from u guys...what will make it faster...Because ive searched everything and its very hard 2 find parts for this engine....maybe because its a n/a engine...but im not sure plz help....Thanx :D

honestly... sell your non turbo and get a turbo car..

why didnt you buy one to start with if you wanted a fast car.

It was like when i was into 200sx's.. soo many damn posts about " hi i got a CA18DE auto and i want to convert to to a SR20det + manual "

its called saving up those extra bucks and getting it later, then something you dont want now.

sheese

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or just put in a 1JZ, and sell me the NEO head 😎
    • Oh, it's been done. You just run a wire out there and back. But they have been known to do coolant temp sensors, MAP sensors, etc. They're not silly (at Regency Park) and know what's what with all the different cars.
    • Please ignore I found the right way of installing it thanks
    • There are advantages, and disadvantages to remapping the factory.   The factory runs billions of different maps, to account for sooooo many variables, especially when you bring in things like constantly variable cams etc. By remapping all those maps appropriately, you can get the car to drive so damn nicely, and very much so like it does from the factory. This means it can utilise a LOT of weird things in the maps, to alter how it drives in situations like cruise on a freeway, and how that will get your fuel economy right down.   I haven't seen an aftermarket ECU that truly has THAT MANY adjustable parameters. EG, the VAG ECUs are somewhere around 2,000 different tables for it to work out what to do at any one point in time. So for a vehicle being daily driven etc, I see this as a great advantage, but it does mean spending a bit more time, and with a tuner who really knows that ECU.   On the flip side, an aftermarket ECU, in something like a weekender, or a proper race car, torque based tuning IMO doesn't make that much sense. In those scenarios you're not out there hunting down stuff like "the best way to minimise fuel usage at minor power so that we can go from 8L/100km to 7.3L/100km. You're more worried about it being ready to make as much freaking power as possible when you step back on the loud pedal as you come out of turn 2, not waiting the extra 100ms for all the cams to adjust etc. So in this scenario, realistically you tune the motor to make power, based on the load. People will then play with things like throttle response, and drive by wire mapping to get it more "driveable".   Funnily enough, I was watching something Finnegans Garage, and he has a huge blown Hemi in a 9 second 1955 Chev that is road registered. To make it more driveable on the road recently, they started testing blocking up the intake with kids footballs, to effectively reduce air flow when they're on the road, and make the throttle less touchy and more driveable. Plus some other weird shit the yankee aftermarket ECUs do. Made me think of Kinks R34...
    • I do this, I also don't get the joke  
×
×
  • Create New...