Jump to content
SAU Community

Recommended Posts

Im looking at getting some 34 Vspec2 injectors for my 32 gtr as mine are leaking and crap.

Will these be adequate later down the track if the mods i intend to do are

Exhaust

Power FC

Turbo Upgrade 2860-7 's

Boost maybe 1 BAR

or should i just buy nismo 555cc

Link to comment
https://www.sau.com.au/forums/topic/211681-34-vspec2-injectors-into-r32gtr/
Share on other sites

Nismo High Performance Injectors Compatibility

Product

16600-RR420 Pink

Model - 555cc

Skyline - R32 GTS-t - HCR32

Stagea - 25t RS Four (-98) - WGNC34

Pulsar GTiR - RNN14

16600-RR543 Yellow

Model - 555cc

Skyline - R33 GTS-t S2 - ECR33

Skyline - R33 GTS-t S1 - ECR33

Silvia - PS13 (Red Top)

Silvia - S14 S1

Silvia - S14 S2

Silvia - S15

Fairlady - Z32

16600-RR544 Red

Model - 740cc

Skyline - R33 GTS-t S2 - ECR33

Skyline - R33 GTS-t S1 - ECR33

Silvia - PS13 (Red Top)

Silvia - S14 S1

Silvia - S14 S2

Silvia - S15

180SX - RPS13 S2 (Black Head)

180SX - RPS13 S1 (Red Head)

180SX - RPS13 S3 (Black Head)

Fairlady - Z32

16600-RR701

Model - 555cc

Z32 VG30DE (-93/9), VG30DETT (-94/10) Fairlady - Z32

16600-RR710 Purple

Model - 480cc

Skyline - R34 GTT - ER34

Stagea - 25t RS (~98+) - WGC34

16600-RRR60 Purple

Model - 600cc

Skyline - R32 GTR - BNR32

Skyline - R33 GTR - BCNR33

Skyline - R34 GTR - BNR34

Skyline - R32 GTS-t - HCR32

Stagea - 25t RS Four (-98) - WGNC34

Silvia - S13 (CA18DET)

Pulsar GTiR - RNN14

- http://www.nengun.com/nismo/high-performance-injectors

Edited by (00)SKYLINE(00)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...