Jump to content
SAU Community

Recommended Posts

I have just discovered i have coolant leaking from under my dash around the heater area. Does this mean my heater core is busted and i need go through the dash removal process that i have read in other threads.

Is there an easy fix or an alternative to all of this?

Link to comment
https://www.sau.com.au/forums/topic/211725-leaking-coolant-under-dash/
Share on other sites

I have just discovered i have coolant leaking from under my dash around the heater area. Does this mean my heater core is busted and i need go through the dash removal process that i have read in other threads.

Is there an easy fix or an alternative to all of this?

ive read somewhere that it can be done by removing the AC unit and not the whole dash, requiring an AC regas, maybe someone can confirm this. You definitely need a new core. i bought mine from here when I did my R33, check compatability though with Stageas.

http://www.ttzed.com/products/products_det...g&do=detail

that was a whole dash job

there are people who have removed the core on a R33 Skyline (auto only from what I understand) via the glovebox; seems only half the dash gets pulled out.

Ive had 2 quotes to do mine, both around $500 in labour plus new core

might be a cold winter for me =(

Mine had the core replaced just before I bought it, and if you go and ask Regan nicely, he may show you the photo's :)

But, at the end of the day, I have heard a lot about people saying it can be done with half the dash removed, but I have never seen it done. Just suck it up and rip the dash out Morgan. There is nothing technical about it, but it is a fairly long and arduous task :yes:

Dale - I was hoping to just pull out half the dash - the pics of the full dash removal are scary! But from the look of it i will give it a go myself in a couple of weeks.

I just have bad memorys of pulling part of the dash out of my XR6 falcon and putting it back to find a few dash lights not working so repeating the process three times!!

Why cant the heater break in the middle of summer rather than the beginning of the cold.

had the same problem few months back its due to jap land not using alot of antifreeze so the heater core falls to pieces. I ordered a new one and got it fitted without a dash out job just removed the glove box and the ac matrix then got the heater matrix out from behined the radio. took about 3hrs. still need to empty an re gas the ac tho!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...