Jump to content
SAU Community

N1 Rb26 Engine Bits

Brockas
 Share

Recommended Posts

Brockas Proficient

Brockas

Posted
Posted

Item: N1 RB26 Conrods

Age: ~25,000kms

Condition: Perfect

Price: $200

Location: Perth

Contact: Paul - PM or 0402418697

Comments: Came out of a perfect N1 RB26 crate motor, motor was stripped down for more power, and rods replaced.

Item: N1 RB26 Pistons

Age: ~25,000kms

Condition: Perfect

Price: $50

Item: N1 RB26 Cams (believe they are 255/8.5mm, fair whack bigger than standard)

Age: ~25,000kms

Condition: Perfect

Price: $250

Item: N1 RB26 Cam Gears

Age: ~25,000kms

Condition: Perfect

Price: $50

Also have other items like head studs and valve springs if anyone's chasing them.

Link to comment
https://www.sau.com.au/forums/topic/211879-n1-rb26-engine-bits/
Share on other sites
Brockas Proficient

Brockas

Posted
  • Author
Posted

Pistons are Sold. They are 86mm, and I have no idea how they are different from a standard one, they just came out of an R34 N1 crate motor (believe they are strengthened with better rings?). I can source standard RB26 pistons for a similar price if anyone else is interested.

Rods and Cams are under offer.

Why do you want pics of the rods? They look like standard RB26 conrods, seen one seen them all.

These parts are listed by Nissan as "semi-forged", which is crap cause its either forged or cast. I'm guessing this is Nissans code for strengthened (shotpeened/cryo'd etc).

As said, all parts are straight out of an R34 N1 motor that was in my R33.

First come first serve, if the offer for the rods / cams falls through, the next person who PM's me about them gets them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • joshuaho96
      Ethanol Content Sensor - Always at 11%?

      By joshuaho96 · Posted

      The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • GTSBoy
      R34 Skyline climate control unit transistor

      By GTSBoy · Posted

      It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...