Jump to content
SAU Community

What Rwkw Would I Have And What Quarter Mile To Exspect

suburban drifter
 Share

Recommended Posts

suburban drifter Community Regular

suburban drifter

Posted
Posted

hey all um just recently bought my gtst r33 line and im slowly pimping it out just wondering if any one would have the slightest on what killawatt i would have and what quarter mile i should exspect with these mods

auto

running 12.8 psi

gready ecu

hybrid fmic

apexi pod filter

shift kit

bosh 040 fuelpump

kakamoto full turbo back exhuast sytem

tein coilovers

running on 265 tyres

and if it matters i got the viscas hub fan converted to electic thermo fan

any ideas ppl

also any mods i need ???

cheers heaps

R34NRG Grand Master

R34NRG

Posted
Posted

i would say possibly around 180-190rwkw

being a auto it deifiently would be alot faster then 15seconds.....thats if u get a good launch and some good tyres

possibly 13 seconds

evil_weevil Grand Master

evil_weevil

Posted
Posted

pimping it out?

as in show style ulleh?

well, take all that crap out before you go to the strip - less weight = go faster.

My guess - 180rwkw at most and the quarter - well, being auto you should be able to get off the line a bit, and if you can - Id say anywhere from 13.8 to 14.5 mph around 98

rev210 Grand Master

rev210

Posted
Posted (edited)

Go down to the strip and find out. Talk is cheap when it comes to 1/4 mile times and certainly no fun at all for you.

:worship:

15 seconds. See how you go. You might be faster than that or you might not?

Edited by rev210
suburban drifter Community Regular

suburban drifter

Posted
  • Author
Posted
Go down to the strip and find out. Talk is cheap when it comes to 1/4 mile times and certainly no fun at all for you.

:worship:

15 seconds. See how you go. You might be faster than that or you might not?

what are gtst r33 standard kw and qm ???

suburban drifter Community Regular

suburban drifter

Posted
  • Author
Posted
They vary alot!!!

I did a 15.0@91 in a stock standard r33gtst manual

cat back and pod filter did a 14.5 @ 95

yeah true that you hear ppl say they got like 220 kw and they got less mods kinda confusses you a bit aye i have playyed with a few r33s on freeway smoshed a few of em but been chopped by a marloo aye haha.. from the mods you can see i have what should i go for next for some good kw gain?

evil_weevil Grand Master

evil_weevil

Posted
Posted

haha yeah dunno....dont listen to them.

Remember, people can bullshit all they want but tell them to take it to the track and thats the true results :worship:

Next mods?

suspension and brakes.

suburban drifter Community Regular

suburban drifter

Posted
  • Author
Posted
haha yeah dunno....dont listen to them.

Remember, people can bullshit all they want but tell them to take it to the track and thats the true results :worship:

Next mods?

suspension and brakes.

yeah i got the coilovers suspention,,and the breaks kinda stuck for engine mods wanna get the killawatt but like dont wanna spend like five grand and dont know what next was thinking bigger injjectors and ajustable cams ??

what setup you running ??

evil_weevil Grand Master

evil_weevil

Posted
Posted

You want to get the kw but dont want to spend too much money?

And you bought a skyline!?!?! lol

hahah

From your mods now,

Id look at a newer/bigger turbo, injectors, z32 air flow meter, retune on ECU, Maybe a stall converter to get off the line better??- all depends on your budget and what you want out of your car mate. Is it going to be a straight line car? daily drive? track?

you need to look at what you want out of the car, and then go in that direction :worship:

My set up is pretty basic, its just the basic mods really.

FMIC, full exhaust and hi-fow cat, ecu, boost, hi-flow turbo - only makes 235rwkw - havent taken it down the 1/4 on this latest set up (I prefer the circuit!)

hope this helps :)

suburban drifter Community Regular

suburban drifter

Posted
  • Author
Posted
You want to get the kw but dont want to spend too much money?

And you bought a skyline!?!?! lol

hahah

From your mods now,

Id look at a newer/bigger turbo, injectors, z32 air flow meter, retune on ECU, Maybe a stall converter to get off the line better??- all depends on your budget and what you want out of your car mate. Is it going to be a straight line car? daily drive? track?

you need to look at what you want out of the car, and then go in that direction :worship:

My set up is pretty basic, its just the basic mods really.

FMIC, full exhaust and hi-fow cat, ecu, boost, hi-flow turbo - only makes 235rwkw - havent taken it down the 1/4 on this latest set up (I prefer the circuit!)

hope this helps :)

hahah im not a tight ass if that what you thinking i spend all my money on my car heeh.just wanna be conservative dont wanna buy shit that does nothing aka bov.just want the proper stuff for power..im looking to eventualy have like drag setup but still street drivable nothing stupid .. only had the car a few months just getting started so any advise is gold

POLICE Mentor

POLICE

Posted
Posted (edited)

really depends how good you are with the schtickmeister :laugh:

:edit: oh just saw it's an auto, then you'll do well if ya have Michael Flatley Feet ;)

Edited by POLICE

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...