Jump to content
SAU Community

Recommended Posts

Hey guys

as the tittle suggests i need some help/advice on my little car trouble.....i have a r33 s1 and lately when i start it in the morning or when its cold the stutters for about 10-20 seconds or so and then idles properly.....and yes i have a load of fuel in there.....and once its warm it runs normal with all the power.....so i was just wondering what is going on there?????

thanks

Krish

Link to comment
https://www.sau.com.au/forums/topic/213234-little-car-trouble/
Share on other sites

I too am having the same thing happen only in the last week in my series 2, thought it may have been my fuel pump or filter so took it to get dynoed on monday and he said everything is running perfectly with no error codes.

When its warm no problems, only when its cold it will idle low amd eventualty the engine drags it up.

I looked through the forums and i think someone was saying something about cold start sensor or valve, does anyone know anything about this or have any other thoughts??

yeah when you cold start it sounds like the engine is going to die off but after a few seconds it drags itself up to normal idle......well i figured that it cant be the fuel filter as after it has warmed up it runs brilliantly.....so wtf is wrong anyone please....

Yea its your idler thing me and Luke just cleaned mine

krishy i find it hard to believe your idle isnt moving

iv'e got amother issue also after my car has been on for a little while after not being on for ages 5 mins into driving it falls over sometimes i can back off and on and it comes good alot of the time i have to pull over wait 1min and restart car and them it's all good

after the cold start the revs jump up down up and down.....but once its nice and warm it just sits at either 1000rpm or sometimes around 1000-1500rpm....it only jumps up to 1500 from 1000 rpm if i have my fan and other things on at the same time.....but now i come to think of it lately it has been sort of jumpy.....not really noticeable though.....so i will take the baby out for a spin after work and see how it goes from there....fill you all in about it tomorrow

Edited by Krishy

Rush: thats the one, IAC AAC number of different names with the same function.

Krishy, its quite possible the buildup prevents the initial movements of the IAC that's why its bad when cold. Once the car warms up and it has broken the "seal" - less noticable. once cools down again, same issue. Try it and see, cant do any harm giving it a clean anyway ;)

yeah i think i will have to give this a go......well it wont hurt really.....but i am not a very mechanically minded person so slightly hesitant on doing this....anyone with experience....there is a carton in it for ya

yeah i think i will have to give this a go......well it wont hurt really.....but i am not a very mechanically minded person so slightly hesitant on doing this....anyone with experience....there is a carton in it for ya

I'm free this Sat arvo and I wanna do the same thing. I'll be the guinea pig! :P

Forget what Madaz says ... I'll take the carton! :woot:

j/k

Just did my AAC then, was filthy, went through half a box of ear buds. Its not hard krishy, just a prick of a spot to get into. Started it up dead cold and seemed to run normal. Will let it cool right down again and try again a few times but seems to have fixed it so far.

Thanks fellas for all ur help. Let us know how it goes krishy

hey just wondering do you start the car up when you jump in.... or do you get in turn to 1 click back from run and wait for the fuel pump and injectors fill as sometimes they can be a bit dry then starting it up with no fuel in the injectors makes the car stutter for a few seconds.

juest a suggestion.... cheers... michael

also another reason this could happen would be if you have aftermarket ecu and the cold start isnt setup properly, my old 31 coupe used to die a few times on cold mornings before it would run just cause the cold start hadnt been setup on the microtech, probly isnt in this case but just another thing for people to note if they have this issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...