Jump to content
SAU Community

Rb25de Vs Rb25det (r34 Neos)

Grunta

By Grunta,
in Engines & Forced Induction

 Share

Recommended Posts

Grunta Enthusiast

Grunta

Posted
Posted

Hello to all that read this,

Im just wondering what are the differences between the RB25DE and the RB25DET,

And dont say one has a turbo or puts out more power,

I want to know the nitty gritty, cams, pistons, crank, rods, head etc

I know compression ratio is high in the NA, but how is this achieved?

Link to comment
https://www.sau.com.au/forums/topic/214425-rb25de-vs-rb25det-r34-neos/
Share on other sites
SKiT_R31 Experienced

SKiT_R31

Posted
Posted
Hello to all that read this,

Im just wondering what are the differences between the RB25DE and the RB25DET,

And dont say one has a turbo or puts out more power,

I want to know the nitty gritty, cams, pistons, crank, rods, head etc

I know compression ratio is high in the NA, but how is this achieved?

turbo is 9:1 CR, N/A is ~ 10.2:1 CR, achieved by different pistons.

Cams are the same, i think just on the turbo the exhaust cam gear is shifted a couple degree's.

Thats the internal difference, external theres the Injectors (370cc vs 270cc), ECU (to power injectors + different map & limiter), obviously different exhaust manifold, intake piping, things like clutch is different, different gbox.... thats about it...

R34GTFOUR Mentor

R34GTFOUR

Posted
Posted (edited)
The springs on the NA's are softer than the turbo ones.

And one has a turbo and puts out more power :rofl:

Remebering that 34's have a different head than the 33's and 2's because of the VVL

i know the r33 rb25de have softer springs than the det, but i've heard the neo engines are the same for both turbo and na

also if the pistons are the only thing different internally, i wonder if the na shares the same gtr rods as the neo det?

anyone pulled a na neo apart yet?

Edited by R34GTFOUR
  • 7 months later...
iseekool Veteran

iseekool

Posted
Posted

All R34 GT4s do not have the tiptronic functionality. From memory the gearboxes are still physically the same (RWD and AWD), just no tiptronic for the GT4 and RB20DE NEO. Tiptronic is only for the RB25DE and RB25DET

Dicer Collaborator

Dicer

Posted
Posted
i know the r33 rb25de have softer springs than the det, but i've heard the neo engines are the same for both turbo and na

GT-V (which is N/A) has same suspension as GT-T, otherwise standard GT has the softer suspension (and also smaller rims, and probably other differences).

R34GTFOUR Mentor

R34GTFOUR

Posted
Posted
GT-V (which is N/A) has same suspension as GT-T, otherwise standard GT has the softer suspension (and also smaller rims, and probably other differences).

i was talking about valve springs, not suspension coil springs :)

SKY-LINER34 Collaborator

SKY-LINER34

Posted
Posted

Hi all,

I would like to confirm the different on the R34 GTT and R34 N/A i've check out my mate's car which is a TT on the dash it have HICAS, Slip, TCS display, when on my N/A 34 it dosen't do that mean i dont have these feature?

If anyone have the spec fact sheet for both these cars?

Cheers

:P

GTS4WD Grand Master

GTS4WD

Posted
Posted
How can i get a LSD installed.

Ive seen a nismo one on NENGUN for 1.8k .. how would i install it.

MRXTCZ

You gotta drop it out of the car.

To do that you need drop drift shaft, prop shaft.

Open up the housing.

And change the gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • PranK
      My new to me M35 Stagea wagon

      By PranK · Posted

      Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Chupapy
      New r33 owner

      By Chupapy · Posted

      Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • jtha7
      New r33 owner

      By jtha7 · Posted

      Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...