Jump to content
SAU Community

Recommended Posts

Hello to all that read this,

Im just wondering what are the differences between the RB25DE and the RB25DET,

And dont say one has a turbo or puts out more power,

I want to know the nitty gritty, cams, pistons, crank, rods, head etc

I know compression ratio is high in the NA, but how is this achieved?

Link to comment
https://www.sau.com.au/forums/topic/214425-rb25de-vs-rb25det-r34-neos/
Share on other sites

Hello to all that read this,

Im just wondering what are the differences between the RB25DE and the RB25DET,

And dont say one has a turbo or puts out more power,

I want to know the nitty gritty, cams, pistons, crank, rods, head etc

I know compression ratio is high in the NA, but how is this achieved?

turbo is 9:1 CR, N/A is ~ 10.2:1 CR, achieved by different pistons.

Cams are the same, i think just on the turbo the exhaust cam gear is shifted a couple degree's.

Thats the internal difference, external theres the Injectors (370cc vs 270cc), ECU (to power injectors + different map & limiter), obviously different exhaust manifold, intake piping, things like clutch is different, different gbox.... thats about it...

The springs on the NA's are softer than the turbo ones.

And one has a turbo and puts out more power :rofl:

Remebering that 34's have a different head than the 33's and 2's because of the VVL

i know the r33 rb25de have softer springs than the det, but i've heard the neo engines are the same for both turbo and na

also if the pistons are the only thing different internally, i wonder if the na shares the same gtr rods as the neo det?

anyone pulled a na neo apart yet?

Edited by R34GTFOUR
  • 7 months later...

All R34 GT4s do not have the tiptronic functionality. From memory the gearboxes are still physically the same (RWD and AWD), just no tiptronic for the GT4 and RB20DE NEO. Tiptronic is only for the RB25DE and RB25DET

i know the r33 rb25de have softer springs than the det, but i've heard the neo engines are the same for both turbo and na

GT-V (which is N/A) has same suspension as GT-T, otherwise standard GT has the softer suspension (and also smaller rims, and probably other differences).

GT-V (which is N/A) has same suspension as GT-T, otherwise standard GT has the softer suspension (and also smaller rims, and probably other differences).

i was talking about valve springs, not suspension coil springs :)

Hi all,

I would like to confirm the different on the R34 GTT and R34 N/A i've check out my mate's car which is a TT on the dash it have HICAS, Slip, TCS display, when on my N/A 34 it dosen't do that mean i dont have these feature?

If anyone have the spec fact sheet for both these cars?

Cheers

:P

How can i get a LSD installed.

Ive seen a nismo one on NENGUN for 1.8k .. how would i install it.

MRXTCZ

You gotta drop it out of the car.

To do that you need drop drift shaft, prop shaft.

Open up the housing.

And change the gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...