Jump to content
SAU Community

Recommended Posts

To me, all skylines can look sweet.

I bought an R34 and now am probably starting to like the SII r33s more.

r32s have always looked tuff, its just they are now getting on in age and commonly niggly little problems.

All skylines look good, all have potential.

I would probably go the R32 though if your planning track days etc, nice and light with a mean tone

  • Replies 165
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

The following is a quote/interview from Tatsuhiro Shibata (owner of R31 House in Japan).

THe following questions were asked (in bold).

(Side note, he was interviewed by "import" magazine, in the skyline special)

Q. The Rb20DET has a bit of a reputation for being sluggish while in low revs. This is espically the case when you start adding big turbos and the like. Whats the best thing you can do to fix this problem?

A. Change the engine.

Q. Seriously?

A. Yes, change it to an RB25/26. Its a much better base to start with. If you must use the RB20, we suggest a complete overhaul of the componets associated with the engine, if not the insides too. That means all electrics, sensors, ignition coils, air pressure regulator. Its 20 years old. It will need a freshen up. Then try adding some sensible modfications.

**End**

I think we can all agree, this guy knows what he is talking about.. his job and life are SKYLINES and SKYLINES only, as proven by the following Q&A.

Q. So, what non-skyline do you fancy?

A. Nothing.

So there we have it.. RB25DET > RB20DET.

As for the style and looks of the two, thats down to personal taste... and no-one should tell you what looks better and what doesnt, as its going to be your car not theirs.

If anyone wants to do further reading, its Issue No. 90 of "Imports"... No more standing in the middle of the road! LOL

Edited by br3ndan

nissan didnt invent the rb25 for no reson... its newer its better.. if you dont care about the interior and how new the car is then get a 32, ive got an r32 with a bored out rb20 and i wouldnt trade it for any r33 whale on the road. if you choose the r32 upgrade to a high flowed r33 turbo get a frontmount + 12psi and thats more than enough power to have fun with for probably the same amount of money you would pick up a 33 for.

*edit: ive got a 3 1/2" rsr catbak no whale out there beats it in the sound department*

Edited by Justa32
I dont take advice from a guy that tries to make a living from modifying Pintaras :P

I think your missing the point, he works with Rb20s 25s and 26s for god knows how many years, so obviously he knows these engines inside out.

OK thanks guys - didn't want this to turn into a sledge fest. If i get the chance ill try out both.

Thanks for all the replies and opinions. Its obvious it comes down to a lot of personal preference and what the car is intended for.

Hopefully i'll be joining the skyline family soon enough ;-)

I think your missing the point, he works with Rb20s 25s and 26s for god knows how many years, so obviously he knows these engines inside out.

But Pintaras dude ! :) If a guy was banging the dumbest, ugliets and yes poor as hell street trash, would you take advice on picking up broads from him? He mods Pintaras so how does he know what is mustard? :D

Nissan won numerous Touring Car Crowns with the RB20 in a Pintara. It must have been a great engine to carry that chassis to victory. Now what has an RB25 ever won, except the race to melt pistons and get ignition/boost cut when you simply throw a bit of boost at the std ECU :(

Yes, i am just trash talking :)

But Pintaras dude ! :bunny: If a guy was banging the dumbest, ugliets and yes poor as hell street trash, would you take advice on picking up broads from him? He mods Pintaras so how does he know what is mustard? :)

Nissan won numerous Touring Car Crowns with the RB20 in a Pintara. It must have been a great engine to carry that chassis to victory. Now what has an RB25 ever won, except the race to melt pistons and get ignition/boost cut when you simply throw a bit of boost at the std ECU :)

Yes, i am just trash talking :bunny:

:( you can't argue with motor sport pedigree! :D

Whens the last time you say a 33gtst racing in Group A! Oh hang on, never saw a 32gtst run there either....

damn, that pintara is looking attractive now. CA20e's aren't they?

Yes, i am just trash talking :P

yep that pretty much summaries what you said in the whole thread :P

fark this is a serious thread!

I rekon.

I mean, I could understand it if the thread was about how R32 GTST owners are Dreamers..., but this is just stoopid.

also need threads about how many r32 need to UPGRADE their parts to r33 parts :D

Edited by ztuned

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...