Jump to content
SAU Community

Recommended Posts

hey im wondering if ppl can post up pics of the their boot install n sub boxes in the boot of their 32 gtr or gts-t.Just wanna get some ideas cos my sub box is too big n to fit it i have no spare wheel.Not cool thanks everyone look forward to seeing them

Link to comment
https://www.sau.com.au/forums/topic/215287-r32-gtrgts-t-sub-box-pics/
Share on other sites

hey mate i don’t have any pic's just yet but i had the same problem that my sub box i had from my old car is just to big for the skyline boot.. I’m in the process of designing and making a custom boot with the fake floor and amps in the floor also. I’m going to use to tyre well and lift it up from there. il give you some info as soon as i get started should be this weekend..

have a good one

niran

hey mate i don't have any pic's just yet but i had the same problem that my sub box i had from my old car is just to big for the skyline boot.. I'm in the process of designing and making a custom boot with the fake floor and amps in the floor also. I'm going to use to tyre well and lift it up from there. il give you some info as soon as i get started should be this weekend..

have a good one

niran

thanks mate thats be good

i went with a small trapezoidal box from autobarn. It only just fits and you will need a sub optimized for a small enclosure to make the most of it.

I managed to fit it while retaining the spare and all boot trim.

I removed it all a month later when i started going to the track :P

  • 1 month later...

You can buy a sealed enclosure for a 12" sub from JB Hi-Fi made by a company called Q-Max. It's just the right size to fit in the R32 boot, you just have to remove the trim over the rear windscreen wiper motor, slide it in, and replace the trim. The enclosure is like $89 or something? Here's a photo of the one in my boot:

post-14331-1212877980_thumb.jpg

post-14331-1212878010_thumb.jpg

I prefer sealed enclosures for their punchiness, anyway. Plus they're smaller so you don't lose as much bootspace. And they look better. :)

Here are some better photos.

post-14331-1212878338_thumb.jpg

post-14331-1212878360_thumb.jpg

You can see in this second photo just how snug the fit is. You can also see why you need to remove the trim over the wiper motor to get it in as well. The good thing about this is that the box is easily held in place.

Edited by HuH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...