Jump to content
SAU Community

Envy Imports + Evidence Onlines Gtr Progress Update


Recommended Posts

Selection of pics from the receival of Envy Imports Premium Edition GTR to the testing phase (rear interior, seats, headlight and front bar removed) to the unveiling at surfers paradise last night.

Evidence Online will supply Envy Imports with the evidence documentation and testing for Envy Imports to be able to comply this and 24 other new GTR's under the new low volume scheme.

Please note: Pics are compressed for dial-up viewing.

PS - the car was being kept in our ALARMED and secure shed, but is now on its way down to emissions testing.

The thought of it being stolen was the primary reason i waiting until the car is in an unkown location before posting on any forums.

Removing the rear interior and seats was necessary to conduct a pull back test on the seats and pull forward test on the child restraint anchorages. Yes I know, bit stupid having to put CRA's in a sports demon like the GTR, but ADR's will be ADR's. The front bar needed to be removed in order to remove the headlamp. Due to the ADR's, even with auto-leveling HID lights, with no washer or wiper on the headlight, we have to convert the lights to normal bulbs and have the light tested by a photometric laboratory.

post-11101-120849401364797933.jpg

post-11101-12084940192005127210.jpg

post-11101-12084940291556524826.jpg

post-11101-1208494039633093163.jpg

post-11101-12084940481478773970.jpg

post-11101-120849406097661892.jpg

post-11101-12084940721658918871.jpg

post-11101-12084940831701132078.jpg

post-11101-1208494097878798271.jpg

post-11101-1208494109862413328.jpg

post-11101-1208494119287126075.jpg

post-11101-12084941341455912594.jpg

post-11101-12084941441765367431.jpg

post-11101-12084941571861675873.jpg

post-11101-12084941711999320509.jpg

post-11101-12084941781702586691.jpg

post-11101-1208494188954025568.jpg

post-11101-1208494201863312415.jpg

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

Can I please ask that no one uses these photos or any wording from my post to publish on any other websites or publications without the consent from either Herman (Envy Imports) or myself (Evidence Online).

I appreciate your assistance.

Ben

Lol..

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

:whistling:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
    • Finally back on the ground and once around the block for the first time in 2+ years
    • Ok a solution was found. I had left the factory oil temp sensor in and it was hooked up. My car never had the triple gauges.  Apparently when you delete the factory pressure and leave the temp sensor connected it triggers the oil light on the dashboard. Disconnected the temp sender, no more light.  I still haven't gotten around to look at the diagrams to figure out how/why they are tied together.
×
×
  • Create New...