Jump to content
SAU Community

Envy Imports + Evidence Onlines Gtr Progress Update


Recommended Posts

Selection of pics from the receival of Envy Imports Premium Edition GTR to the testing phase (rear interior, seats, headlight and front bar removed) to the unveiling at surfers paradise last night.

Evidence Online will supply Envy Imports with the evidence documentation and testing for Envy Imports to be able to comply this and 24 other new GTR's under the new low volume scheme.

Please note: Pics are compressed for dial-up viewing.

PS - the car was being kept in our ALARMED and secure shed, but is now on its way down to emissions testing.

The thought of it being stolen was the primary reason i waiting until the car is in an unkown location before posting on any forums.

Removing the rear interior and seats was necessary to conduct a pull back test on the seats and pull forward test on the child restraint anchorages. Yes I know, bit stupid having to put CRA's in a sports demon like the GTR, but ADR's will be ADR's. The front bar needed to be removed in order to remove the headlamp. Due to the ADR's, even with auto-leveling HID lights, with no washer or wiper on the headlight, we have to convert the lights to normal bulbs and have the light tested by a photometric laboratory.

post-11101-120849401364797933.jpg

post-11101-12084940192005127210.jpg

post-11101-12084940291556524826.jpg

post-11101-1208494039633093163.jpg

post-11101-12084940481478773970.jpg

post-11101-120849406097661892.jpg

post-11101-12084940721658918871.jpg

post-11101-12084940831701132078.jpg

post-11101-1208494097878798271.jpg

post-11101-1208494109862413328.jpg

post-11101-1208494119287126075.jpg

post-11101-12084941341455912594.jpg

post-11101-12084941441765367431.jpg

post-11101-12084941571861675873.jpg

post-11101-12084941711999320509.jpg

post-11101-12084941781702586691.jpg

post-11101-1208494188954025568.jpg

post-11101-1208494201863312415.jpg

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

Can I please ask that no one uses these photos or any wording from my post to publish on any other websites or publications without the consent from either Herman (Envy Imports) or myself (Evidence Online).

I appreciate your assistance.

Ben

Lol..

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

I know what you mean. Generally people just copy what you've said and post everywhere, but someone has taken my comments, edited and added their own bits to make it look like theres an opportunity for more workshops to get involved in this car compliance wise, which is untrue.

:whistling:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...