Jump to content
SAU Community

Recommended Posts

whats the highest output for a rb25de (non hybrid rb30 bottom end or nothing) you guys have seen or heard of?

what mods did it have etc?

ill post up pics of my na nugget when i get home..

some nice NA cars here :angry:

go the NA <3

Edited by whyte
nice beau..

tell me what skirts ur gonna put on..

i wanna someone to discuss with ahaha.

david

a kit will probably be one of the last mods i do unless i can get the kit itself aswel as fitted & painted cheap :D

probably go for Do-luck side skirts possible

i like the skirts in the following pics ;)

post-38129-1194845346_thumb.jpg

post-38129-1194845483_thumb.jpg

post-38129-1194845763_thumb.jpg

Heres a quick couple of pics of mine...

89 S3 R31 Silhoutte with RB30DE. Just running it in at the moment though so no power figures yet...

DSC_0197600x800.jpg

What intake plenum?

If you could please tell me all the details in the build.. everything!.. rings, rods, pistons, mm shaved off block etc. etc. etc.

What ECU are you using?.. I dont see an AFM

Thats a heavily modified GTR inlet on an RB25DE head.

Rings are some sort of race ring I cant remember the brand though...

Rods - RB30

Pistons - RB25DE

mm of block - ? not much...

mm of head - a bit!

ECU - Autronic SM4

It also has an RB25 oil pump, large cams from Japan, custom exhaust, 444cc injectors, EVERYTHING that rotates has been balanced, head has been worked within an inch of its life!

Thats a heavily modified GTR inlet on an RB25DE head.

Rings are some sort of race ring I cant remember the brand though...

Rods - RB30

Pistons - RB25DE

mm of block - ? not much...

mm of head - a bit!

ECU - Autronic SM4

It also has an RB25 oil pump, large cams from Japan, custom exhaust, 444cc injectors, EVERYTHING that rotates has been balanced, head has been worked within an inch of its life!

Holly shizen!

SLAP THAT THING ON A DYNO! Im really curious! With a sheet!

I remeber reading somewhere that the RB25 geodgen pin its higher on the piston and hence lowers CR because the piston sits lower.. Is this true?

Was there much work involved in fitting in a 25 oil pump?

Have any pics?.. with the timing cover off?.. Or during the build?

Cheers mate!

pic of my NA monster!

current mods: rb25de R33 S1 motor, manual conversion, 2.5" 5zigen catback, K&N large airfilter & CAI, nismo shocks & springs on the front, G4 coilovers on the rear, recaro driver seat (looking for rail for pass side :( ) the usual sound system with sub, front+rear speakers & tv/dvd player. was a rb20det shell with all the det goodies but with a NA motor.

future mods:

coby extracers, straight flutes taking over the cannon, apexi safc install & tune

g4 front coilovers, kazama castor rods, monkey warehouse rear camber arms, d-shop front adjustable camber arms, front & rear strut braces, cusco f+r swaybars, some sort of front lip (perhaps JSAI saurus?) & vertex side & rear bar. also doing a 2dr rear taillight conversion

r32dxu1.th.jpg

dsc03444copyoe8.th.jpg

Edited by whyte
also doing a 2dr rear taillight conversion

WOOO! FOUR DOOR LOVE!!!

BUT NO NO NO!!! :spank: please dont change to 2dr rear lights.. the 4dr ones are HOT! :(

Here is my love:

R32 GTS4

Came with RB20DET

Now has S2 Rb25DE

Blacked out front blinkers

Painted Brake calipars

Deleted spoiler - WHITH GHETTO ELECTRICAL TAPE! :P

Head unit and fronts.. over bass from my last car.. besides.. the exhaust is too sexy to not listen to it..

HSD HR Coilovers

Nismo Cat back

GTR rims - Unfortunately you cant really see the sexy offset or the stretched 205 tyres on the 8" rim..

Ill be getting more pics up soon

Photos are before coilovers.. so she still sits a little high..

(clickskis)

1507071647jy5.th.jpg

2207072319sk6.th.jpg

Old Plates.. Will post pics of new plates when they arrive.. =] Their cools plates..

t_Theskylinem_4904793.jpg

This is how its done!

2104071634nr0.th.jpg

Future mods:

3L bottom end..

Seats

Brakes

Weight loss

Headwork + ECU

And somewhere in there struts and sway bars..

And its not NA.. but here is papa bears 32.. guess what its packing? :w00t:

imgp0176cc9.th.jpg

imgp0177wn7.th.jpg

My car is still cooler :)

Nismo Progressive springs and shockies..

Soon to have much more goodies..

Edited by GTS4WD
  • 2 weeks later...

I like mine, funnily enough. Still have to lower it (happening in Jan) aprox 1 1/2 inches and get a few marks off the rear where ive been badged, bloody idiots but anyways!!!

http://s21.photobucket.com/albums/b258/EMZ...nt=IMG_2523.jpg

http://s21.photobucket.com/albums/b258/EMZ...nt=IMG_2533.jpg

http://s21.photobucket.com/albums/b258/EMZ...nt=IMG_2524.jpg

http://s21.photobucket.com/albums/b258/EMZ...nt=2ff63464.jpg

http://i21.photobucket.com/albums/b258/EMZ...nceptWithPi.jpg

Suppose there just jealous!!!

Evan

Edited by EMZ R33
:) verde scorpion!!!! i was going to get those rims on my s.2 R33... but decided to save up for a R34 Gt-t... and no im not gettin verde anymore ;) but they look so mint! shoulda got deep dish, but still a nice ride :rofl: Edited by Darkness_Ryda1

Here are a few of mine, had it resprayed a few weeks ago and had the bodykit fitted. Used to be blue over silver 2 tone, now its a custom blue with 2 pearls: purple and green.

post-9734-1196398336_thumb.jpg

post-9734-1196398393_thumb.jpg

post-9734-1196398444_thumb.jpg

post-9734-1196398516_thumb.jpg what the colour actually looks like in the sun.

:) verde scorpion!!!! i was going to get those rims on my s.2 R33... but decided to save up for a R34 Gt-t... and no im not gettin verde anymore ;) but they look so mint! shoulda got deep dish, but still a nice ride :rofl:

Thanks for the kind words Darkness_Ryda, i would have got the deap dish and hell they look awesome but they only came is 20" or above and specially for SUV's only....................so i was told!!!

oh is that so? i was under the impression you could get them for 18 an 19s. try tempetyres...they have them on the web, pretty sure they come in any size deep dish. but then again, u already have the rims, not to worry :P.

oh is that so? i was under the impression you could get them for 18 an 19s. try tempetyres...they have them on the web, pretty sure they come in any size deep dish. but then again, u already have the rims, not to worry :rofl:.

Thats who i went through, sysdney people, maybe they didnt have them in stock and wanted to sell me the regular ones. they are 18"....and yeah would have prefered dish but no to worry!!

the blue looks nice, how come you have turbo badge tho :) no n/a pride!

Thanks man. The badges were on the car when I bought it. Im pretty sure there was a thread a while ago saying the red badges dont mean that its a gtst, just different spec or something like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...