Jump to content
SAU Community

Recommended Posts

95 r33 single turbo skyline when i take the revs up around high 3- 6 thousand range it starts to hesitate and splurt and carry on then once its gone through that it takes off, sometimes it can continue on longer and others times not.. im not sure what the problem is..

When i bought the car the o2 sensor had been disconected and cut off, we dont no why they would of done that so we reconnected the o2 sensor and since then the hesitating has got worse?

Does it need a tune, pcm playing up?

Not getting enough fuel or too much?

I've changes all plugs leads, besides that the car runs smooth.

Any help would be much appreciated.

Jack

If you reconnected and it got worse, the O2 is stuffed... hence it would have just been disconnected.

Really doesnt do much anyhow (if using aftermarket ECU)

You dont have leads on an RB, so not sure how you changed those exactly :thumbsup:

What other mods?

Sounds like a normal case of bad coil packs, incorrectly gapped copper plugs or the lucky last of rich and retard (stock ECU having a fit due to mods other than factory). Could be either one or a combination of some

If you reconnected and it got worse, the O2 is stuffed... hence it would have just been disconnected.

Really doesnt do much anyhow (if using aftermarket ECU)

You dont have leads on an RB, so not sure how you changed those exactly :thumbsup:

What other mods?

Sounds like a normal case of bad coil packs, incorrectly gapped copper plugs or the lucky last of rich and retard (stock ECU having a fit due to mods other than factory). Could be either one or a combination of some

Yeah im not sure what anyone had done previously to the car, but since i have had it i have put and upgrade to the intercooler and lifted the boost about 2 psi.?

I think your rite with the ecu been the problem.. i changed the spark plugs not long ago with uridium style ones.. i might have to do the coil pack next???

Well iridi's are a waste of cash mate and they foul easily (if the car is running rich, that could be your problem in stuffed plugs again)

So pull them out and have a look first, if dead put coppers in.

Coil packs, possibly... but the problem doesnt usually "go away" in upper RPM, but then your boost might be dropping off and that could be a reason potentially also (have you had it on a dyno???)

No i havn't had it on the dyno at all since buying it. Where i live in the Northern Territory the closest place is 500km away and i have heard bad reports on that place from alot of people, so the next closest place would be darwin. 1100km away.

When i change the spark plugs they didn't seem to be showing of any fuel running rich.

The boost dropping off would that be for turing up the boost a few psi? how would i check or find out it was that.?

Map the boost pressure vs rpm, suppose it could be done via your eyes?

Only way (really) is a dyno to be honest, you could probably buy some logging tools and what not but its going to cost some coin and for single use its kinda silly in a way.

Then you cna check AFR's also, just a few basic things that help determine where the problems are (or are not to rule things out)

Did the plugs show anything else? Plugs do tell some interesting stories :thumbsup:

Check the coil packs one by one for hairline cracks, if they have some then they will me arc'in and causing missfiring

NT?

I had to sell my Celica ZR years ago because there was no premium (hi octane) unleaded for sale up there.

If you're running standard unleaded, thats half your problem.

I say run premium (or use octane booster) and fit a new O2 sensor.

lol, haha read my recent post before spend 400 on splitfires "about to fork out on splitfires"..

put new bcp6es plugs in.. if its still a issue then look toward coils..

dont know about u bout 400-500 anit just pocket money to me!!!

Im going to order some new splitfire coil packs for it hopefully that will solve the problem.

Thanks for the help everyone

I just found this thread what do you all think about that?

http://www.skylinesaustralia.com/forums/Pe...ix-t216342.html

Edited by jack-95-rb25
We have tried that, 98 octane and ab gas, still the same i seem to think it's the ecu, needs to be tuned for the little mods that have been done

you put leaded petrol in your car? AV gas is leaded

thats a bad idea considering you havea catalytic covertor

My brother did that i only just found out it was mixed with 98 and ab gas.. it won't happen again hehehe.

I talked to the mechanic up this way about the coil problem as he has had very little to do with the turboe skylines he said that if it was the coil pack it would be playing up all the time not just at high revs? can anybody shed some light on the coil pack issue.

Hi there i have the same problem when pushing the car past 4500rpm.my car has the following mods:BOV3inch fUJISUBO catback exhaustboost 9psipod filter.iridium spark plugs 0.8mmi had a 3inch exhaust before with holes in it (brand unkown) and it never used to back fire like that.now that i have replaced it with a 3 inch catback it is splurting.any ideas might change the plugs first?

I've been told its the coil pack mate i have not yet tried that but im looking into it.

I was wondering if there's anyway to test the existing coils, or how to check for damages. I was reading in another thread something about the cracks on the coils.. where would they be located if there's any? on what part?

there are a couple of threads for cheap fixes to coil packs

as it revs you increase the air into the motor and the fuel - the need for a stronger spark is now, hence the gremlin coming out.

im currently having similar problems with mine, especially after boosting it to 9psi. under hard acceleration it seems to be reluctant to go most of the time and will then stutter. i was told it is most definatley my coils, and have also been recommended splitfires. my mechanic said it was because my rea coil was shorting, every now and then when the hood is up you can hear a spark sort of sound which is the short.

hope you figure it out,

will have my coils in a few weeks hopfully that does the trick.

peace

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...