Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

got defected this weekend aswell. pod, bov, two low, he didnt have a db meter so he said i will be receiving a letter in next few days stating which authorised inspection station i can take car to because two many people are doing dogys. does that sound right?

Do you only get defected for aftermarket kits?

What about gtrs and evos and stis..

They have pretty big fmic already.

they are standard fitment from factory, therefore meeting emission's level's as per manufacture... short answear is its A ok!

I got pulled up on monday.

HWP said I will be getting a letter for exhuast and pod.

Need to go to a dedicated inspection station for them to take photos, send them to the EPA and compare to pictures they have of standard car.

I also have fmic and the dude at the inspection station said I need everything returned to stock or proof it complies with ADR's.

Without getting a emission test, is there anything on the net/or here that states that front mounts are adr compliant. I dont have factory smic, and its a last resort to scrabble around getting all the items.

I got pulled up on monday.

HWP said I will be getting a letter for exhuast and pod.

Need to go to a dedicated inspection station for them to take photos, send them to the EPA and compare to pictures they have of standard car.

I also have fmic and the dude at the inspection station said I need everything returned to stock or proof it complies with ADR's.

Without getting a emission test, is there anything on the net/or here that states that front mounts are adr compliant. I dont have factory smic, and its a last resort to scrabble around getting all the items.

I knew you would get done after i first seen your car on the other forum and you living in campbelltown. And i bet you got done there too, right? HWP are the worst there. I hate going to my mates house at st andrews just wondering if ill get home without being defected. My mate lives around the corner from the cop shop and is on first name basis with one of the cops there now. Hes been done numerous times.

IM240 will test 4 things(correct me if i'm wrong)

THC- total hydrocarbons

CO- Carbon Monoxides

CO2 - Carbon Dioxides

NOx - Oxides of Nitrogen

Some of you other guys may be able to recall the levels that these should be at to pass.

The hydrocarbons is done by taking a reading inside a sealed room to see if you car is leaking fuel vapour, so make sure your carbon canistor is connected correctly, the other three are exhaust readings.

Cheers guys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...