Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Exedy 5 puk clutch - used for about 3000 kms... hardly worn, couldn't hold the 300rwkw... was fine at 270rwkw though!

$300 ono

still got it??

will pay now!

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC are in QLD.... although you don't need to get it repaired there. Although would be the cheapest option.

http://www.npcperformance.com.au/

1500km at most.... splines were damaged due to faulty input shaft... uploading some photos now..

npc rebuilt (jacobson spec plates)

os giken ts2bd. (not damperd anymore)

post-19586-1211797006_thumb.jpgpost-19586-1211796902_thumb.jpgpost-19586-1211796749_thumb.jpgpost-19586-1211796510_thumb.jpg

the "g box" one has the dammaged spline. pulled out due to motor rebuild. drove fine but upgrded to a r3c.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

porsche cup car slicks.

24-64-18.

aka 240-40-18.

these are almost completly new. again used for only one practice session. new tread depth is 3.1mm the LOWEST on these is 2.4mm.

so around 15% worn on average.

$600 a set.(4) ($550 each new)

post-19586-1211799376_thumb.jpg post-19586-1211799560_thumb.jpg

6 available total. (2 on hold.)

also available is the rear. big ass gibson gtr size. (if you can fit 275's under the rear of you car these will fit.)

27-68-18.

aka 270-45-18.

also only about 15% worn.

350 a pair.

post-19586-1211800073_thumb.jpg post-19586-1211800894_thumb.jpg post-19586-1211801011_thumb.jpg

r32 gtr gearbox partly dissasembled.

smashed input shaft. suit rebuild or gearset upgrade.

$250 post-19586-1211859433_thumb.jpg post-19586-1211859312_thumb.jpg

r32gtr gearbox smashed 3rd. complete un-opened.. suit gearst upgrade or rebuild. still drives fine with no noises except no 3rd lol.

$350 post-19586-1211859605_thumb.jpg

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

hey there

20% worn meaning theres 80% left still??

thanks

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

They are one of each, but are the same thing. Only difference is the 33 bell housing is more strengthened than a 32 one. Both are push type, both suit a 32 GTR...

Pm offer, these boxes are Daves not mine so it isn't my call :down:

hey there

20% worn meaning theres 80% left still??

thanks

Yes, there is still 80% left :down:

ok, first post updated as of 6.6.08....

All irrelevant posts of mine have been deleted to clean the thread (ie sold items)

Cheers

Anna

If they are not picked up i will take them, need to be sent to Vic though

Hey Roy,

no dramas, il let you know if they don't get collected :)

Can work out freight etc then

mind shooting me a pm of the Rb26 please ? :( thanks! :D

no dramas, Il get Dave to send you one today. :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...