Jump to content
SAU Community

Recommended Posts

Bolt on wide body guards. Most people cut the standard guard out to get more clearance once the new guard is installed. There's no going back!

Any idea where to find em? Hard to find anything for sale in terms of a widebody R32 kit but i know some people have them! Something to make the guards look like that silver R32 would be awesome :)

  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

Any idea where to find em? Hard to find anything for sale in terms of a widebody R32 kit but i know some people have them! Something to make the guards look like that silver R32 would be awesome ;)

When I last looked, carmate sold those type of guards. Not too sure on how the quality will be like though. :)

Cracking only occurs when/if you don't heat the paint up enough/too much or are pulling/stretching the guard out too much. If you got the guards flared before the respray, there's nothing to worry about.

I wouldn't say that's "flaring". This is what I see flaring as...

rollerfendersME.jpg

Obviously flaring and some extra work done to it to make it look a little better.

DSC_0494.jpg

Flare people normally go for.

both very hot lookin cars.

what rims are they on the Green S14....i want them.

Any idea where to find em? Hard to find anything for sale in terms of a widebody R32 kit but i know some people have them! Something to make the guards look like that silver R32 would be awesome :thumbsup:

d-max make them. You can get them off race spec who is a sponsor here.

As for the silver gtst, i think it looks rubbish. They've obviously put some effort into blending it all in nicely and then stuck bumps everywhere on top. It's silly. I'd be inclined to either blend it all in properly and paint it, or go the honest look and trial fit, trim and paint the wide guards, then alloy pop rivet them straight onto the quarter. Obviously, it's my opinion only and every one has different tastes. As long as the guy who owns it likes what he has then thats all the matters

d-max make them. You can get them off race spec who is a sponsor here.

As for the silver gtst, i think it looks rubbish. They've obviously put some effort into blending it all in nicely and then stuck bumps everywhere on top. It's silly. I'd be inclined to either blend it all in properly and paint it, or go the honest look and trial fit, trim and paint the wide guards, then alloy pop rivet them straight onto the quarter. Obviously, it's my opinion only and every one has different tastes. As long as the guy who owns it likes what he has then thats all the matters

Is it this? http://racespec.com.au/product_info.php?cP...products_id=552 Not so crash hot about the front bar would go Vertex but would that kit be the widebody? or is it something from http://racespec.com.au/index.php?cPath=29_57_247 ?

Yeah i agree the bumps on it looks shit.. would look way better without it..

Thanks

Was only talking about the over fenders. The pic in your fist link has their wide front and rear guards on it but there is a better one from the rear floating around the net.

http://racespec.com.au/product_info.php?cP...products_id=567

You mean there are better wide front/rear guards then the D-max? Can never find any.. seems hard to find wide body kits for the R32.. Im planning on a vertex kit but if i get those wide guards from the link u just posted, would that make it look pretty much like that silver 32?

no, i meant there was a better pic of the blue r32 with all the d max bits on it :domokun: It's a rear 3/4 view.

I'd say that that car would have plus 20mm rear over fenders on it. If you want bigger there is always the blister kit, i think it's from uras, but the lines of the car are all f^&ked up with it.

both very hot lookin cars.

what rims are they on the Green S14....i want them.

like these ones?

WhiteTyres1.JPG

Meister S1 2 Piece - Excellent Condition, Approximately 80% Tread

18x9 +35

18x9 +38

$2700

http://www.j-imports.com.au/

^^ Yeah i thought that was flaring too.. that silver R32 what is done to that? just widebody kit on it isnt it?

check my epic build thread

I got viva fender skins... lol they're wavier than a sydney to hobart boat race and don't even line up with the body properly. we had to chop and reglass to get it looking somewhat decent and actually fit on the car. Seems to be a problem with a lot of wider guards... even genuine stuff from Japan.

but it's looking alright now.. should throw up some build pics soon.

I was selling an original BN Sports widebody kit last year that made your car wider by about a foot :) jetman on the forums should be sporting it on his car soon.

Hmmm so dont buy from viva coz they sell kits that dont even line up on the car? lol ill take that into account..

Any comments on the D-max from Racespec though? Whether it's gonna be the same or not?

Yeahhhh where could u get a BN sports widebody kit from? Can never seem to find em around!

like these ones?

WhiteTyres1.JPG

Meister S1 2 Piece - Excellent Condition, Approximately 80% Tread

18x9 +35

18x9 +38

$2700

http://www.j-imports.com.au/

the wheels on the green s14 are actually SSR SP1

work meisters are slightly different.

17SSR.jpg

^ adrenalin motor sports & dmd the image in QLD sell bn blister widebody kits for around $1800

Edited by whyte
the wheels on the green s14 are actually SSR SP1

work meisters are slightly different.

17SSR.jpg

^ adrenalin motor sports & dmd the image in QLD sell bn blister widebody kits for around $1800

i like the white work meisters better....would look good on my black 32 i reckon..

cheers for the info...now to save my pennies haha

WhiteTyres1.JPG

Meister S1 2 Piece - Excellent Condition, Approximately 80% Tread

18x9 +35

18x9 +38

$2700

http://www.j-imports.com.au/

*FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP* *FAP*

i like the white work meisters better....would look good on my black 32 i reckon..

cheers for the info...now to save my pennies haha

Front are 18x9 -7 with 225-40 FK452s, Rear are 18x10 -0 with 235-40 FK452s.

post-32186-1210497226_thumb.jpg post-32186-1210497252_thumb.jpg

post-32186-1210497272_thumb.jpg post-32186-1210497293_thumb.jpg

Well, I got my guards slightly flare today for $120.00 (only the two back ones) - quite plesaed with the result... however, now I will have to get fatter tyres and spaced them out a bit.

Does anyone know of a good profile for 18 inch rims on a R33? Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...